{"title":"Quest","description":null,"products":[{"product_id":"quest-70-overhead-merv-13-filter-4037724","title":"Quest 70 Overhead MERV 13 Filter (4037724)","description":"\u003ch2\u003eCleaner air in, steadier humidity control out\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eQuest 70 Overhead MERV 13 Filter\u003c\/strong\u003e is the high-efficiency replacement air filter for the \u003cstrong\u003eQuest 70 overhead dehumidifier\u003c\/strong\u003e. Dust, pollen and \u003cstrong\u003emould spores\u003c\/strong\u003e circulating in a grow room will eventually clog a dehumidifier's intake, and once that happens the unit works harder to shift the same amount of moisture. This \u003cstrong\u003eMERV 13\u003c\/strong\u003e filter keeps airflow clean so the Quest 70 can manage humidity the way it is supposed to, supporting healthy plants through vegetative growth and flowering.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMERV 13 filtration\u003c\/strong\u003e captures fine airborne particles including dust, pollen and mould spores\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains efficient airflow\u003c\/strong\u003e through the Quest 70 dehumidifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable humidity\u003c\/strong\u003e in grow tents and grow rooms through veg and bloom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects the unit\u003c\/strong\u003e from dust build-up on internal components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick, simple replacement\u003c\/strong\u003e installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrectly sized\u003c\/strong\u003e at \u003cstrong\u003e23cm x 28cm x 2.5cm\u003c\/strong\u003e for a direct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRestricted airflow and unreliable humidity control?\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003eblocked or dirty filter\u003c\/strong\u003e is an easily missed cause of \u003cstrong\u003ehumidity creeping up\u003c\/strong\u003e in a grow room. Once dust and debris coat the intake, \u003cstrong\u003eairflow drops\u003c\/strong\u003e and the dehumidifier becomes far less effective at removing moisture, which is exactly when \u003cstrong\u003emould risk and poor bud density\u003c\/strong\u003e show up in flowering. Swapping in a clean MERV 13 filter restores airflow and lets the Quest 70 do its job properly from early veg through to harvest.\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower down\u003c\/strong\u003e and unplug the Quest 70 before replacing the filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen the filter access panel\u003c\/strong\u003e on the unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the used or clogged filter\u003c\/strong\u003e from the housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit the new MERV 13 filter\u003c\/strong\u003e in the same orientation, making sure it sits flush with no gaps around the edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplace the panel\u003c\/strong\u003e and restore power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect regularly\u003c\/strong\u003e and replace when visibly dirty or airflow is reduced\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e replacement pleated air filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration rating:\u003c\/strong\u003e MERV 13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaptures:\u003c\/strong\u003e dust, pollen, mould spores and fine debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 23cm x 28cm x 2.5cm (H x L x W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Quest 70 overhead dehumidifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 4037724\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement interval:\u003c\/strong\u003e when visibly dirty or airflow drops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52696875401482,"sku":"ENV-QUES-012-01","price":29.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-quest-70-overhead-merv-13-filter-38112455524567.avif?v=1773242690"},{"product_id":"quest-155-dehumidifier-return-duct-kit-4028610","title":"Quest 155 Dehumidifier - Return Duct Kit (4028610)","description":"\u003ch2\u003eSite Your Quest 155 Outside the Grow Room Without Losing Capacity\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eQuest 155 Return Duct Kit\u003c\/strong\u003e is a purpose-built ducting accessory for the \u003cstrong\u003eQuest Dual 155 dehumidifier\u003c\/strong\u003e. It lets you connect return ducting to the unit so the dehumidifier can be installed \u003cstrong\u003eremotely - outside the grow room or tent\u003c\/strong\u003e - while still pulling humid air from the cultivation space. That is the answer for growers who need serious dehumidification but do not want a large unit taking up floor space, adding heat or adding fan noise inside the canopy. The result is precise \u003cstrong\u003ehumidity control\u003c\/strong\u003e through veg and flower with a tidier, more efficient grow environment.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote installation\u003c\/strong\u003e - site the Quest Dual 155 outside the grow room while it draws air from inside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess heat and noise\u003c\/strong\u003e in the growing space, keeping climate control easier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore usable floor space\u003c\/strong\u003e inside the tent or grow room\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty 12-inch flange\u003c\/strong\u003e designed specifically for the Quest 155 \/ Dual 155\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter airflow management\u003c\/strong\u003e in large grow rooms and sealed, climate-controlled setups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable humidity control\u003c\/strong\u003e for strong plant health and improved yields\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLarge Dehumidifier Crowding and Heating Your Grow Space?\u003c\/h3\u003e\u003cp\u003eBig dehumidifiers eat valuable space inside a \u003cstrong\u003egrow tent or grow room\u003c\/strong\u003e and the \u003cstrong\u003eheat\u003c\/strong\u003e they generate works against your climate control - exactly when you need stable \u003cstrong\u003ehumidity\u003c\/strong\u003e most, particularly through the \u003cstrong\u003ebloom stage\u003c\/strong\u003e where excess moisture raises the risk of \u003cstrong\u003emould\u003c\/strong\u003e and poor bud density. Running a return duct out to a remotely sited unit keeps full dehumidification capacity without the clutter.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eTurn off and disconnect the \u003cstrong\u003eQuest Dual 155\u003c\/strong\u003e before fitting the kit\u003c\/li\u003e\n\u003cli\u003eAttach the \u003cstrong\u003e12-inch return flange\u003c\/strong\u003e to the designated return air opening on the unit\u003c\/li\u003e\n\u003cli\u003eSecure the flange firmly using appropriate fixings\u003c\/li\u003e\n\u003cli\u003eConnect compatible \u003cstrong\u003e12-inch ducting\u003c\/strong\u003e to the flange\u003c\/li\u003e\n\u003cli\u003eRoute the ducting from the grow room to the remotely placed dehumidifier\u003c\/li\u003e\n\u003cli\u003eSeal all duct joints properly to stop air leaks and maintain suction\u003c\/li\u003e\n\u003c\/ol\u003e\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e return duct kit \/ remote-install accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Quest Dual 155 dehumidifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange size:\u003c\/strong\u003e heavy-duty 12-inch return flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDucting required:\u003c\/strong\u003e compatible 12-inch ducting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHost unit (Quest Dual 155):\u003c\/strong\u003e 155 pints\/day moisture removal, 391 CFM airflow, 920W, 8A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 4028610\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52696884150538,"sku":"ENV-QUES-006-01","price":79.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-quest-155-dehumidifier-return-duct-kit-intake-38112243286231.webp?v=1773242817"},{"product_id":"quest-155-dehumidifier-supply-duct-out-kit-4028607","title":"Quest 155 Dehumidifier - Supply Duct Out Kit (4028607)","description":"\u003ch2\u003eDuct Warm, Damp Air Out and Keep Your Grow Room Cool\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eQuest 155 Supply Duct Out Kit (4028607)\u003c\/strong\u003e connects ducting to the outlet side of a \u003cstrong\u003eQuest Dual 155 dehumidifier\u003c\/strong\u003e, so the warm, dry air it produces can be directed away from the grow room instead of raising the temperature in the space. In tightly controlled tents and rooms, managing \u003cstrong\u003eboth humidity and heat\u003c\/strong\u003e matters, especially through flowering where airflow and humidity directly affect bud density. The kit ships with \u003cstrong\u003etwo 10-inch duct collars\u003c\/strong\u003e, foam seals for an airtight fit, and self-drilling screws for a straightforward install.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 10-inch duct collars\u003c\/strong\u003e for flexible duct connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam sealing components\u003c\/strong\u003e for an airtight fit to the unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-drilling hex screws\u003c\/strong\u003e for fixing the collars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet-side ducting\u003c\/strong\u003e connects directly to the Quest Dual 155\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedirects warm, dry air\u003c\/strong\u003e away from the grow room to ease temperature management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 10-inch collars\u003c\/strong\u003e for flexible ducting routes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam seals\u003c\/strong\u003e help ensure an airtight fit and prevent air leaks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-drilling screws included\u003c\/strong\u003e for a quick, tool-light fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExtra Heat From High-Capacity Dehumidification\u003c\/h3\u003e\n\u003cp\u003eHigh-capacity dehumidifiers pull large volumes of moisture but \u003cstrong\u003erelease warm, dry air\u003c\/strong\u003e back into the space, and in a sealed room that extra \u003cstrong\u003eheat load\u003c\/strong\u003e makes climate control harder. This kit lets you \u003cstrong\u003educt that output air away\u003c\/strong\u003e, holding stable temperatures while still controlling humidity, so veg and flowering plants sit in a more balanced environment with less stress and steadier yields.\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn off and unplug the Quest Dual 155 before installation.\u003c\/li\u003e\n\u003cli\u003ePosition the supplied 10-inch duct collars on the outlet side of the unit.\u003c\/li\u003e\n\u003cli\u003eSecure the collars using the included self-drilling hex screws.\u003c\/li\u003e\n\u003cli\u003eApply the foam seals for an airtight connection between collar and dehumidifier.\u003c\/li\u003e\n\u003cli\u003eAttach compatible ducting to the collars and route it to the desired exhaust location.\u003c\/li\u003e\n\u003cli\u003eCheck all duct connections are secure and sealed to prevent air leaks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 4028607\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Quest Dual 155 dehumidifier (outlet side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuct collars:\u003c\/strong\u003e Two 10-inch collars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e Foam sealing components for an airtight fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixings:\u003c\/strong\u003e Self-drilling hex screws included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Ducting and register grills are not included and must be sourced separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52696896209162,"sku":"ENV-QUES-007-01","price":91.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-quest-155-dehumidifier-supply-duct-out-kit-38112257474775.webp?v=1773243019"},{"product_id":"quest-100-compact-commercial-dehumidifier","title":"Quest 100 Compact Commercial Dehumidifier","description":"\u003ch2\u003eCommercial moisture removal in a footprint 20% smaller than it should be\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eQuest 100\u003c\/strong\u003e is the \u003cstrong\u003e50 Hz international model\u003c\/strong\u003e — \u003cstrong\u003e230V\u003c\/strong\u003e, so it runs on a standard UK supply. It removes \u003cstrong\u003e44 litres a day\u003c\/strong\u003e at 26.7°C and 60% RH while drawing only \u003cstrong\u003e2.5 amps\u003c\/strong\u003e, which is what its patented \u003cstrong\u003eM-CoRR multi-coil refrigeration\u003c\/strong\u003e buys you: commercial output on a \u003cstrong\u003e13 amp UK breaker\u003c\/strong\u003e. ⚑ \u003cstrong\u003eIt also drains internally, so unlike most dehumidifiers of this size it needs no P-trap\u003c\/strong\u003e — one less thing to plumb and one less thing to get wrong.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e44 litres a day\u003c\/strong\u003e at 26.7°C and 60% RH, and \u003cstrong\u003e29.3 litres\u003c\/strong\u003e at the cooler 23.9°C \/ 50% RH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.2 litres per kWh\u003c\/strong\u003e — patented M-CoRR gives the highest efficiency Quest make\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 amps and 540 watts\u003c\/strong\u003e, on a \u003cstrong\u003e13 A\u003c\/strong\u003e UK breaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo P-trap required\u003c\/strong\u003e thanks to the internal drainage system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital controls\u003c\/strong\u003e with 1% RH setpoints, self-diagnostics and filter alerts at 2,000 fan hours\u003c\/li\u003e\n\u003cli\u003e⚑ \u003cstrong\u003eDark mode\u003c\/strong\u003e disables every display light, for rooms where light leak matters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverhead or ground placement\u003c\/strong\u003e, with a corrosion-resistant base for damp rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable speed EC fan\u003c\/strong\u003e and MERV 13 filtration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhen the room is small and the humidity load is not\u003c\/h3\u003e\u003cp\u003eA tight space fills with moisture faster than a large one, and there is rarely room for the machine that could handle it. The Quest 100 is built for exactly that gap — a \u003cstrong\u003e61 x 40.6 x 36.8 cm\u003c\/strong\u003e body at \u003cstrong\u003e27.2 kg\u003c\/strong\u003e that still shifts 44 litres a day. It holds a setpoint in \u003cstrong\u003e1% increments\u003c\/strong\u003e rather than swinging around it, works from \u003cstrong\u003e13°C to 35°C\u003c\/strong\u003e, and its \u003cstrong\u003eMERV 13\u003c\/strong\u003e filter takes dust, pollen and mould spores out of the air while it dries it.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand it on the floor or hang it\u003c\/strong\u003e — both are supported; the hanging kit is a separate accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug it in.\u003c\/strong\u003e No installation and no commissioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet your target humidity\u003c\/strong\u003e in 1% steps on the digital panel, or hand control to a building system through the \u003cstrong\u003e24V terminal block\u003c\/strong\u003e, which disables the onboard sensor while active\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun a drain line\u003c\/strong\u003e from the 1.9 cm threaded outlet — ⚑ \u003cstrong\u003eno P-trap needed on this model\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose fan mode:\u003c\/strong\u003e \u003cem\u003eAuto\u003c\/em\u003e for on-demand circulation, \u003cem\u003eOn\u003c\/em\u003e for continuous airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChange the MERV 13 filter\u003c\/strong\u003e when the 2,000-hour alert appears\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 4046590-XX (Quest 100, 50 Hz international)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater removal:\u003c\/strong\u003e 44 litres\/day at 26.7°C \/ 60% RH; 29.3 litres\/day at 23.9°C \/ 50% RH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e 3.2 litres\/kWh (6.7 pints\/kWh)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 540 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent draw:\u003c\/strong\u003e 2.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 230V, 50 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended breaker:\u003c\/strong\u003e 13 A (UK)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 280 CFM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal heat load:\u003c\/strong\u003e 6,200 BTU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e 13°C to 35°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 61 (L) x 40.6 (W) x 36.8 (H) cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27.2 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e MERV 13, filter size 30.5 x 35.6 x 2.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e onboard digital with low voltage terminal block, self-diagnostics, dark mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFan:\u003c\/strong\u003e variable speed EC motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower cord:\u003c\/strong\u003e 3 m, IEC 60320-C13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant:\u003c\/strong\u003e R454b, 17 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain connection:\u003c\/strong\u003e 1.9 cm threaded NPT, internal drainage, no P-trap required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52697120375050,"sku":"ENV-QUES-002-01","price":2837.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/Untitleddesign_4.png?v=1773243924"},{"product_id":"quest-70-overhead-dehumidifier","title":"Quest 70 Overhead Dehumidifier","description":"\u003ch2\u003eOverhead humidity control that keeps your floor space free\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eQuest 70\u003c\/strong\u003e is a professional dehumidifier built for sealed rooms and tight spaces, and it is the \u003cstrong\u003e50 Hz international model\u003c\/strong\u003e — \u003cstrong\u003e230V\u003c\/strong\u003e, so it runs on a normal UK supply with no transformer. It mounts overhead or stands on the floor, and at \u003cstrong\u003e25 kg\u003c\/strong\u003e in a \u003cstrong\u003e53.3 x 30.5 x 30.5 cm\u003c\/strong\u003e body it takes up far less room than its output suggests. ⚑ \u003cstrong\u003eIts water-removal figure is quoted at 26.7°C and 60% RH\u003c\/strong\u003e — realistic room conditions, not the 32°C \/ 80% RH that flatters most competitors' numbers.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e26 litres a day\u003c\/strong\u003e at 26.7°C and 60% RH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.22 litres per kWh\u003c\/strong\u003e — among the lowest running costs in its class\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnly 2.1 amps and 480 watts\u003c\/strong\u003e, so it frees up electricity for other equipment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMERV 13 filtration\u003c\/strong\u003e captures dust, pollen and mould spores as it dries the air\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverhead or ground placement\u003c\/strong\u003e — hanging kit available separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard dehumidistat\u003c\/strong\u003e plus a low voltage terminal block for external control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto restart\u003c\/strong\u003e returns to your previous settings after a power cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 metre power cord\u003c\/strong\u003e for reach without an extension lead\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAir that will not dry out, in a room with no space to spare\u003c\/h3\u003e\u003cp\u003eIn a sealed room, \u003cstrong\u003eevery litre your plants drink is transpired straight back into the air\u003c\/strong\u003e. Once relative humidity climbs and stays there you get condensation on cold surfaces, mould on damp material and a root zone that stops drawing water because the air will not take any more. The Quest 70 holds humidity at a set point instead of chasing it, and because it works across a \u003cstrong\u003e5°C to 35°C\u003c\/strong\u003e range it keeps doing so when the room runs cold at night or hot under lights.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand it on the floor or hang it overhead\u003c\/strong\u003e — both are supported; the hanging kit is a separate accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug it in.\u003c\/strong\u003e No installation, no commissioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet your target humidity\u003c\/strong\u003e on the onboard dehumidistat, or drive it from an external controller through the terminal block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun a drain line\u003c\/strong\u003e from the 1.9 cm threaded outlet, and ⚑ \u003cstrong\u003efit a P-trap\u003c\/strong\u003e — this model needs one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuct the intake and exhaust\u003c\/strong\u003e with the duct kit if you need to move air to a specific part of the room\u003c\/li\u003e\n\u003cli\u003e⚑ \u003cstrong\u003eChange the MERV 13 filter every cycle.\u003c\/strong\u003e Most faults on these units trace back to a blocked filter, not the machine\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 4033810-XX (Quest 70, 50 Hz international)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater removal:\u003c\/strong\u003e 26 litres\/day at 26.7°C and 60% RH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e 2.22 litres\/kWh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 480 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent draw:\u003c\/strong\u003e 2.1 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 230V, 50 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 255 m³\/hr (150 CFM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e 5°C to 35°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 53.3 (L) x 30.5 (W) x 30.5 (H) cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e MERV 13, filter size 23 x 28 x 3 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e onboard dehumidistat with low voltage terminal block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower cord:\u003c\/strong\u003e 7 m, IEC 60320-C13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant:\u003c\/strong\u003e R410A, 15 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain connection:\u003c\/strong\u003e 1.9 cm threaded NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e CE rated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52697143738634,"sku":"ENV-QUES-011-01","price":1289.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-quest-70-overhead-dehumidifier-29226828464312.webp?v=1773246730"},{"product_id":"quest-100-dehumidifier-accessories-merv-13-filter-duct-kit-hanging-kit","title":"Quest 100 Dehumidifier Accessories | MERV 13 Filter, Duct Kit \u0026 Hanging Kit","description":"\u003ch2\u003eGenuine parts to keep your Quest 100 filtering, ducting and mounted right\u003c\/h2\u003e\u003cp\u003eThese are the genuine manufacturer accessories for the \u003cstrong\u003eQuest 100 Dehumidifier\u003c\/strong\u003e, covering the three things that most affect performance in a sealed grow room: \u003cstrong\u003efiltration, ducting and mounting\u003c\/strong\u003e. In hydroponics and sealed tents the dehumidifier runs continuously to strip out moisture from plant transpiration, and a clogged filter, badly routed airflow or a unit hogging floor space all quietly erode that performance. Genuine \u003cstrong\u003eMERV-13\u003c\/strong\u003e filtration, a duct kit and a hanging kit keep the unit clean, its airflow directed where it is needed, and the floor clear.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMERV-13 replacement filter\u003c\/strong\u003e (12\" x 14\" x 1\") sized for the Quest 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuct kit\u003c\/strong\u003e with collars for intake and exhaust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHanging kit\u003c\/strong\u003e for overhead mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Quest 100 fit\u003c\/strong\u003e engineered for the exact unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMERV-13 filtration\u003c\/strong\u003e captures mould spores, pollen and dust before the coils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects internal coils\u003c\/strong\u003e from dust build-up for consistent performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuct kit\u003c\/strong\u003e directs intake and exhaust air exactly where it's needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHanging kit\u003c\/strong\u003e lifts the unit above canopy level and frees floor space\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable humidity\u003c\/strong\u003e supports healthy plants through veg and bloom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter clogging, poor airflow and wasted floor space?\u003c\/h3\u003e\u003cp\u003eA grow room \u003cstrong\u003edehumidifier\u003c\/strong\u003e works hard through veg and bloom, and a \u003cstrong\u003eblocked filter\u003c\/strong\u003e or badly routed airflow lets \u003cstrong\u003ehumidity\u003c\/strong\u003e creep up - raising the risk of \u003cstrong\u003emould\u003c\/strong\u003e, weak growth and poor nutrient uptake. Ducting the intake and exhaust lets you pull from and return air to exactly the right spots, while hanging the unit above the canopy improves air movement and clears valuable floor space.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eMERV-13 Filter\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTurn off and unplug the dehumidifier.\u003c\/li\u003e\n\u003cli\u003eOpen the filter compartment and remove the old filter.\u003c\/li\u003e\n\u003cli\u003eFit the replacement \u003cstrong\u003e12\" x 14\" x 1\" MERV-13\u003c\/strong\u003e filter so it sits flush in the frame.\u003c\/li\u003e\n\u003cli\u003eReplace \u003cstrong\u003eevery grow cycle\u003c\/strong\u003e to maintain airflow and filtration efficiency.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eDuct Kit\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eFit the duct collars to the intake and exhaust ports.\u003c\/li\u003e\n\u003cli\u003eConnect compatible ducting and secure it with clamps or fasteners.\u003c\/li\u003e\n\u003cli\u003eRoute the ducting to direct airflow where it's needed in the room.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eHanging Kit\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eFix the mounting hardware securely to ceiling joists or a structural support.\u003c\/li\u003e\n\u003cli\u003eAttach the suspension brackets to the dehumidifier.\u003c\/li\u003e\n\u003cli\u003eLift and secure the unit, checking it hangs level before switching on.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Quest 100 Dehumidifier (genuine parts)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e MERV-13, 12\" x 14\" x 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter replacement:\u003c\/strong\u003e every grow cycle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuct kit:\u003c\/strong\u003e intake and exhaust collars for ducted airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHanging kit:\u003c\/strong\u003e heavy-duty overhead suspension hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Mer 13 Filter (4042005)","offer_id":52697171427594,"sku":"ENV-QUES-003-01","price":44.95,"currency_code":"GBP","in_stock":true},{"title":"Supply Return Duct Kit (4042265)","offer_id":53409545650442,"sku":"ENV-QUES-003-02","price":236.99,"currency_code":"GBP","in_stock":true},{"title":"Hanging Kit (4042835)","offer_id":53409545683210,"sku":"ENV-QUES-003-03","price":338.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-quest-100-dehumidifier-accessories-merv-13-filter-duct-kit-hanging-kit-1224556785.webp?v=1773256637"},{"product_id":"quest-70-dehumidifier-duct-kit-4038599","title":"Quest 70 Dehumidifier Duct Kit (4038599)","description":"\u003ch2\u003eSend the Quest 70's dry air exactly where it's needed\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eQuest 70 Dehumidifier Duct Kit\u003c\/strong\u003e lets you attach ducting directly to the \u003cstrong\u003eQuest 70 Overhead Dehumidifier\u003c\/strong\u003e, so you can direct intake and exhaust airflow to specific parts of a sealed grow room rather than relying on the unit's natural draw. In a sealed space that targeted air distribution is what stops one corner running too humid while another stays dry, the kind of uneven moisture that drives mould, weak development and patchy flowering across the canopy. Fitted with \u003cstrong\u003e8-inch duct collars\u003c\/strong\u003e, the kit makes those supply and return connections quick and secure.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built\u003c\/strong\u003e for the Quest 70 Overhead Dehumidifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-inch duct collars included\u003c\/strong\u003e for quick, secure supply and return connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirects supply and return airflow\u003c\/strong\u003e to the areas that need moisture removal most\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEvens out humidity\u003c\/strong\u003e across sealed grow rooms, tents and hydroponic setups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves air circulation\u003c\/strong\u003e for steadier conditions through veg and bloom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn off and unplug the \u003cstrong\u003eQuest 70\u003c\/strong\u003e before installation.\u003c\/li\u003e\n\u003cli\u003eFit the \u003cstrong\u003e8-inch duct collars\u003c\/strong\u003e to the intake and return air ports on the unit.\u003c\/li\u003e\n\u003cli\u003eSecure compatible \u003cstrong\u003e8-inch ducting\u003c\/strong\u003e to the collars with clamps or fasteners.\u003c\/li\u003e\n\u003cli\u003eRoute the ducting to direct airflow where humidity control is required.\u003c\/li\u003e\n\u003cli\u003eKeep duct runs as straight as possible to preserve airflow performance.\u003c\/li\u003e\n\u003cli\u003eRestore power and monitor humidity to confirm balanced airflow across the space.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Quest 70 Overhead Dehumidifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuct collar size:\u003c\/strong\u003e 8 inch (supply and return)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart reference:\u003c\/strong\u003e 4038599\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52697202032906,"sku":"ENV-QUES-009-01","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-quest-70-dehumidifier-duct-kit-38013350183127.webp?v=1773247976"},{"product_id":"quest-70-pre-filter-700962","title":"Quest 70 Pre Filter (700962)","description":"\u003ch2\u003eKeep the Quest 70 pulling moisture at full capacity\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eQuest 70 Pre Filter (700962)\u003c\/strong\u003e is a direct replacement filter for the \u003cstrong\u003eQuest 70 Overhead Dehumidifier\u003c\/strong\u003e, catching dust, coco and soil particles and dried plant debris before they reach the coils. In a working grow room those airborne particles build up fast, restricting airflow and forcing the unit to work harder while removing less moisture. Fitting a fresh \u003cstrong\u003e28cm x 23cm\u003c\/strong\u003e pre-filter on a regular schedule keeps airflow strong and moisture removal consistent through vegetative growth and the bloom stage.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built\u003c\/strong\u003e replacement sized 28cm x 23cm for the Quest 70 dehumidifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects internal coils\u003c\/strong\u003e from dust, media particles and plant debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains strong airflow\u003c\/strong\u003e for efficient, consistent humidity control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteadier grow room RH\u003c\/strong\u003e reduces mould risk during flowering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick swap\u003c\/strong\u003e with no tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a clogged filter wrecks humidity control\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003eblocked or dirty filter\u003c\/strong\u003e chokes airflow through the dehumidifier, so it removes less moisture and struggles to hold a stable \u003cstrong\u003ehumidity level\u003c\/strong\u003e, raising the risk of \u003cstrong\u003emould\u003c\/strong\u003e in bloom and slowing plant development. Replacing the pre-filter regularly keeps air moving through the coils and moisture removal predictable, protecting the unit and your environment.\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn off and unplug the Quest 70 before replacing the filter.\u003c\/li\u003e\n\u003cli\u003eLocate the filter compartment and remove the old pre-filter.\u003c\/li\u003e\n\u003cli\u003eSlide in the new \u003cstrong\u003e28cm x 23cm\u003c\/strong\u003e pre-filter, sitting it flat and secure in the slot.\u003c\/li\u003e\n\u003cli\u003eRestore power and run the dehumidifier as normal.\u003c\/li\u003e\n\u003cli\u003eInspect regularly and replace whenever it looks loaded with dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Replacement pre-filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 28cm x 23cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Quest 70 Overhead Dehumidifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 700962\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52697208160522,"sku":"ENV-QUES-013-01","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-quest-70-pre-filter-38112383205591.jpg?v=1773248100"},{"product_id":"quest-155-dehumidifier-hanging-bracket-set-4037400","title":"Quest 155 Dehumidifier - Hanging Bracket Set (4037400)","description":"\u003ch2\u003eGet the Quest 155 Off the Floor and Airflow Moving Evenly\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eQuest 155 Hanging Bracket Set (4037400)\u003c\/strong\u003e makes overhead installation of the \u003cstrong\u003eQuest 155 Dehumidifier\u003c\/strong\u003e simple and secure, freeing up floor space that is usually crowded with hydroponic gear, irrigation lines and plant trays. These \u003cstrong\u003eheavy-duty brackets\u003c\/strong\u003e bolt to the base of the unit so it can be safely suspended above canopy level, improving air circulation and moisture removal across the whole room.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt specifically\u003c\/strong\u003e for the Quest 155 Dehumidifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe overhead installation\u003c\/strong\u003e via two heavy-duty brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrees up floor space\u003c\/strong\u003e for irrigation and hydroponic equipment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves air circulation\u003c\/strong\u003e above the plant canopy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports consistent humidity control\u003c\/strong\u003e for healthier growth and flowering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e for long-term grow room use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCrowded Floors and Uneven Airflow\u003c\/h3\u003e\n\u003cp\u003eA floor-standing dehumidifier \u003cstrong\u003eeats working space\u003c\/strong\u003e and often fails to push airflow evenly through the canopy. Suspending the Quest 155 overhead \u003cstrong\u003eimproves air movement\u003c\/strong\u003e throughout the room while keeping the unit clear of irrigation systems and trays, helping hold \u003cstrong\u003ebalanced humidity\u003c\/strong\u003e, reduce mould risk and support stronger yields in hydro, coco and soil.\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn off and unplug the Quest 155 dehumidifier before installation.\u003c\/li\u003e\n\u003cli\u003eAttach the two hanging brackets to the base of the unit at the mounting points.\u003c\/li\u003e\n\u003cli\u003eInstall ceiling anchors or suspension hardware rated for the unit's weight.\u003c\/li\u003e\n\u003cli\u003eLift and secure the dehumidifier using the brackets, checking it hangs level.\u003c\/li\u003e\n\u003cli\u003eRestore power and confirm airflow and drainage are working correctly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 4037400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Quest 155 Dehumidifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Two heavy-duty hanging brackets for overhead mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Bolts to the base mounting points for ceiling suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52697213337866,"sku":"ENV-QUES-004-01","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-quest-155-dehumidifier-hanging-bracket-set-38112452968663.webp?v=1773248205"},{"product_id":"quest-deh-3000r-controller","title":"Quest DEH 3000R Controller","description":"\u003ch2\u003eDigital humidity control that keeps Quest dehumidifiers on target\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eQuest DEH 3000R Controller\u003c\/strong\u003e is a digital environmental controller that gives precise command over \u003cstrong\u003ehumidity and ventilation\u003c\/strong\u003e when paired with a compatible Quest dehumidifier. A clear \u003cstrong\u003ebacklit LCD display\u003c\/strong\u003e shows relative humidity, temperature, date and time, making it easy to hold consistent conditions across hydroponic, coco and soil grows. It is built for the moisture surge of the \u003cstrong\u003ebloom stage\u003c\/strong\u003e, when excess humidity turns into mould, airy buds and lost yield if it is not caught early. \u003cstrong\u003eCompatible with Quest Dual 105, 155, 185, 205 and 225 dehumidifiers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise digital humidity control\u003c\/strong\u003e with an adjustable \u003cstrong\u003e%RH set point\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge backlit LCD display\u003c\/strong\u003e showing humidity, temperature, date and time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable ventilation timer\u003c\/strong\u003e for better grow-room airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous or automatic fan operation\u003c\/strong\u003e to match your environment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in high-temperature cut-out\u003c\/strong\u003e for added protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Quest commercial dehumidifiers\u003c\/strong\u003e (Dual 105\/155\/185\/205\/225)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs humidity drift costing you bud density?\u003c\/h3\u003e\n\u003cp\u003eIn \u003cstrong\u003esealed rooms and hydroponic setups\u003c\/strong\u003e, transpiration pushes out large amounts of moisture and \u003cstrong\u003ehumidity swings\u003c\/strong\u003e through the day without close control, raising \u003cstrong\u003emould risk during flowering\u003c\/strong\u003e and knocking nutrient uptake off track. The DEH 3000R lets you set a single \u003cstrong\u003ehumidity target\u003c\/strong\u003e and have the dehumidifier hold it automatically, while the ventilation timer clears stale air. Note that it runs one target rather than separate day and night settings.\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall the controller where it reflects true ambient room conditions.\u003c\/li\u003e\n\u003cli\u003eConnect it to a compatible Quest dehumidifier.\u003c\/li\u003e\n\u003cli\u003ePower on and set your target \u003cstrong\u003erelative humidity (%RH)\u003c\/strong\u003e on the digital interface.\u003c\/li\u003e\n\u003cli\u003eChoose \u003cstrong\u003econtinuous or automatic\u003c\/strong\u003e fan operation to suit your ventilation.\u003c\/li\u003e\n\u003cli\u003eSet the \u003cstrong\u003eventilation timer\u003c\/strong\u003e if controlling a motorised damper or vent system.\u003c\/li\u003e\n\u003cli\u003eMonitor humidity and temperature on the display through veg and flowering.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e digital humidity and ventilation controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e backlit LCD (humidity, temperature, date, time)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e adjustable humidity set point (single target, no day\/night split)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFan modes:\u003c\/strong\u003e continuous or automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimer:\u003c\/strong\u003e programmable ventilation timer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e built-in high-temperature cut-out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Quest Dual 105, 155, 185, 205 and 225 dehumidifiers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52697218711818,"sku":"ENV-QUES-015-01","price":344.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-quest-deh-3000r-controller-72750800437621.webp?v=1773248325"},{"product_id":"quest-70-hanging-kit-4036695","title":"Quest 70 Hanging Kit (4036695)","description":"\u003ch2\u003eSuspend your dehumidifier overhead and reclaim the floor\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eQuest 70 Hanging Kit\u003c\/strong\u003e is a purpose-built mounting solution for the \u003cstrong\u003eQuest 70 Overhead Dehumidifier (PN 4033750)\u003c\/strong\u003e, letting you suspend the unit above the canopy rather than losing valuable floor space to it. Mounted overhead, the dehumidifier distributes air more evenly and pulls moisture more effectively across the room, which helps clear the humid pockets that build up around ground-level units during veg and bloom.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour eyebolts\u003c\/strong\u003e for the unit's mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspension cables with carabiners\u003c\/strong\u003e for secure ceiling mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt specifically for the Quest 70\u003c\/strong\u003e Dehumidifier (PN 4033750)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure overhead suspension\u003c\/strong\u003e using four eyebolts and carabiner cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrees up floor space\u003c\/strong\u003e for hydroponic systems and irrigation gear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves air circulation\u003c\/strong\u003e and even moisture removal above the canopy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable components\u003c\/strong\u003e for professional grow room use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHumid pockets forming around a floor-standing unit?\u003c\/h3\u003e\n\u003cp\u003eA ground-level dehumidifier eats working space and struggles to move air through the canopy, leaving \u003cstrong\u003edamp pockets\u003c\/strong\u003e that invite mould in bloom. Hung overhead, the Quest 70 removes moisture more evenly across the whole room, protecting plant health and yields.\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn off and unplug the Quest 70 before installation.\u003c\/li\u003e\n\u003cli\u003eFit the \u003cstrong\u003efour eyebolts\u003c\/strong\u003e into the mounting points on the unit.\u003c\/li\u003e\n\u003cli\u003eAttach the \u003cstrong\u003ecarabiner cables\u003c\/strong\u003e to the eyebolts.\u003c\/li\u003e\n\u003cli\u003eSecure the cables to strong ceiling anchors rated for the unit's weight.\u003c\/li\u003e\n\u003cli\u003eAdjust cable length so it hangs level above the canopy, then restore power.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52697227591946,"sku":"ENV-QUES-010-01","price":108.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-quest-70-hanging-kit-38112316653783.webp?v=1773248435"},{"product_id":"climate-master-dehumidifier-cm-145","title":"Climate Master Dehumidifier CM-145","description":"\u003ch2\u003eHigh-Capacity Moisture Removal for Sealed Grow Rooms\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eClimate Master Dehumidifier CM-145\u003c\/strong\u003e is a high-output grow room dehumidifier that removes \u003cstrong\u003eup to 145 litres of moisture per day at 30°C\u003c\/strong\u003e, built for sealed rooms and the humidity surge that comes with heavy flowering. It runs alongside \u003cstrong\u003eTrolMaster environmental controllers via the HS1 interface\u003c\/strong\u003e for automated climate control, or standalone using its \u003cstrong\u003ebuilt-in digital humidistat\u003c\/strong\u003e. With \u003cstrong\u003e650 m3\/h airflow\u003c\/strong\u003e and strong refrigerant-based extraction, it's suited to demanding sealed hydroponic, coco and soil environments.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e145 litres\/day extraction at 30°C\u003c\/strong\u003e for large, demanding grow rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650 m3\/h airflow\u003c\/strong\u003e for effective moisture removal in sealed spaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrolMaster HS1 compatibility\u003c\/strong\u003e for automated climate control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in digital humidistat\u003c\/strong\u003e for standalone operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces mould, mildew and humidity stress\u003c\/strong\u003e during flowering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePromotes efficient transpiration\u003c\/strong\u003e and better nutrient uptake for denser buds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBattling mould and airy buds from runaway humidity?\u003c\/h3\u003e\u003cp\u003eSealed grow rooms build \u003cstrong\u003ehumidity\u003c\/strong\u003e fast once plants hit heavy vegetative growth or bloom, and without strong extraction that shows up as \u003cstrong\u003econdensation, mould outbreaks, airy buds and reduced yields\u003c\/strong\u003e. The CM-145 pulls large volumes of moisture out of the air so plants transpire properly and move nutrients through the plant efficiently, supporting stronger roots and denser flowers and keeping humidity out of the danger zone.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePosition the dehumidifier where airflow around it is unobstructed.\u003c\/li\u003e\n\u003cli\u003eConnect to power and set your target humidity using the built-in controller.\u003c\/li\u003e\n\u003cli\u003eFor automated control, connect the unit to a TrolMaster system via the HS1 interface.\u003c\/li\u003e\n\u003cli\u003eEnsure the drainage outlet is properly connected for continuous water removal.\u003c\/li\u003e\n\u003cli\u003eMonitor humidity and adjust settings to suit vegetative growth or the bloom stage.\u003c\/li\u003e\n\u003cli\u003eClean or replace the nylon filter periodically to maintain performance.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtraction capacity:\u003c\/strong\u003e up to 145 litres\/day at 30°C, 80% RH (88 litres\/day at 26°C, 60% RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 1200W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 650 m3\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 88 x 60 x 44 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 65 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant:\u003c\/strong\u003e R410A (1.3 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e Nylon (replaceable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet\/outlet diameter:\u003c\/strong\u003e 242mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e Built-in digital humidistat; TrolMaster HS1 interface compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":52697298108682,"sku":"ENV-QUES-001-01","price":2389.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/dehumidifier-climate-master-dehumidifier-cm-145-68484460708213.webp?v=1773248843"},{"product_id":"quest-f9-air-mover","title":"Quest F9 Air Mover Grow Room Circulation Fan","description":"\u003ch2\u003eShift Serious Air Without Lighting Up Your Dark Period\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eQuest F9 Air Mover\u003c\/strong\u003e circulates \u003cstrong\u003e750 cubic feet of air per minute\u003c\/strong\u003e (roughly \u003cstrong\u003e1,274 m3\/h\u003c\/strong\u003e) from a housing slim enough to slot into the tightest spaces in a grow room. Rather than simply blasting one direction, it \u003cstrong\u003emixes and spreads air at the same time\u003c\/strong\u003e, which is what actually stops hot, stagnant microclimates forming between plants and up against the walls. It also runs with \u003cstrong\u003eno external lights\u003c\/strong\u003e, so it can stay on through the dark period without leaking light into the room.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750 CFM of air movement\u003c\/strong\u003e - around \u003cstrong\u003e1,274 m3\/h\u003c\/strong\u003e of circulation from a single unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixes and spreads simultaneously\u003c\/strong\u003e - evens out temperature and humidity instead of creating a wind tunnel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStops hot microclimates\u003c\/strong\u003e - keeps pockets of stale, warm air from sitting in the canopy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits tight spaces\u003c\/strong\u003e - a low-profile body that drops into corners, under benches and between rows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo external lights\u003c\/strong\u003e - safe to run through the night period with no light contamination\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHot Pockets and Stagnant Air in the Canopy\u003c\/h3\u003e\u003cp\u003ePoor airflow is one of the quietest causes of low yields. Where air sits still you get warm, humid pockets that push leaf temperature up and set the room up for humidity problems later in flower. Plants in those spots show it as slow growth and airy buds while the rest of the room runs fine. Blending the whole air volume keeps conditions consistent wall to wall.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacement:\u003c\/strong\u003e sit it on the floor or a shelf and aim along the room so air rolls back over the canopy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e point it at the warmest areas - usually under the lights and in dead corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDark period:\u003c\/strong\u003e leave it running; there are no lights to cover or tape over\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance:\u003c\/strong\u003e keep the intake clear so the full 750 CFM is available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"hcs-specs\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 750 cubic feet per minute (approx. 1,274 m3\/h)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir pattern:\u003c\/strong\u003e mixes and spreads air simultaneously\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicator lights:\u003c\/strong\u003e none - no external lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e low-profile body for tight spaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e special order item, standard shipping only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":53445686264074,"sku":null,"price":331.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/air-movement-fan-quest-f9-air-mover-1202966241.webp?v=1785289620"}],"url":"https:\/\/hydrocropshop.co.uk\/collections\/quest.oembed","provider":"Hydro Crop Shop","version":"1.0","type":"link"}