BudBox Pro Tent Kit (360cm x 240cm x 200cm)

A complete 24-pot lighting and extraction setup in one box

This BudBox Pro Tent Kit pairs a heavy-duty 360cm x 240cm x 200cm grow tent with a full lighting and extraction package, so growers moving up to a larger room don't have to source frames, ballasts, filters and timers separately. Weak frames, light leaks and undersized extraction are the usual reasons big rooms underperform, and this kit is built around BudBox's powder-coated steel frame and a matched 10 inch Rhino extraction kit to design those problems out. Set up for 6 x 600W lamps and a 24-pot system.

What's Included

• 1 x Monsterbud Hobby Grow Tent (360cm x 240cm x 200cm)
• 6 x Omega Pro-V 600W Magnetic Ballasts, with the option to upgrade to Omega Digi Pro 600W Digital Ballasts
• 6 x Omega Dual Spectrum 600W Grow Lamps
• 6 x Eurowing Reflectors (5m IEC cable)
• 1 x 10" Rhino Hobby Extraction Filter Kit
• 6 x Rope Ratchets
• 1 x Jack Chain (10 metres)
• 2 x Heavy Duty 24 Hour Timers
• 1 x Eco Technics PowerStar 4 Way Contactor
• 1 x Eco Technics PowerStar 2 Way Contactor

Key Benefits

• Powder-coated steel frame in 16mm and 25mm tempered rolled steel carries the weight of six 600W lights plus filter and fan
• Push-and-click corner connectors add load-bearing strength and make assembly tool-free
• Waterproof inner and spill tray contain runoff from the 24-pot system
• High-quality zips and seams create a fully sealed area with no light leaks
• Oversized reducible vents (4 x 340mm, 8 x 275mm) fit ducting of any size, plus extra ports for cables, irrigation and air-cooled lights
• Digital ballast upgrade option lets you dim lamp output to control room temperature on the hottest days
• Matched 10" Rhino extraction sized to move air and scrub odour across the full footprint

How to Use

1. Assemble the frame using the push-and-click poles and metal corner connectors, then fit the inner liner and spill tray.
2. Hang the six reflectors and lamps on the rope ratchets, wiring ballasts through the PowerStar contactors.
3. Mount the 10" Rhino filter and fan inline near the top of the tent and run ducting through the oversized vents.
4. Set the two 24-hour timers for the light cycle, with the contactors switching the lamp load safely.
5. If fitted, use the digital ballasts to dim output during warm spells to hold temperatures down.