{"product_id":"ecotechnics-unis-co2-controller-full-emitter-kit","title":"Ecotechnics Unis CO2 Controller – CO2 Gas Regulator Kit","description":"\u003ch2\u003eSet-and-Forget CO2 Enrichment for Bottled Gas Growers\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEcotechnics Unis CO2 Controller\u003c\/strong\u003e pairs a microprocessor control panel with a pre-set \u003cstrong\u003ehorticultural CO2 regulator and solenoid emitter\u003c\/strong\u003e, so there is no flow-rate maths to work out before you start dosing. Dial in your growing area's volume, connect the regulator to a bottled CO2 supply, and the Unis takes care of the rest.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnis CO2 Controller\u003c\/strong\u003e – the microprocessor control panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorticultural CO2 Regulator\u003c\/strong\u003e – factory pre-set to match the controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid emitter valve\u003c\/strong\u003e and connecting wire\u003c\/li\u003e\n\u003cli\u003eSealing washer for the gas bottle connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 room-size settings\u003c\/strong\u003e covering 1m³ to 100m³ – dial in your grow space and go\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-set flow rate\u003c\/strong\u003e – the regulator is factory-calibrated to the controller, so nothing needs adjusting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas remaining gauge\u003c\/strong\u003e built into the regulator so you always know when a bottle needs swapping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks in sealed rooms or alongside an extraction fan\u003c\/strong\u003e – nudge the setting up slightly to compensate for CO2 pulled out by the exhaust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull 1 year warranty\u003c\/strong\u003e for genuine peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLosing CO2 Through Guesswork\u003c\/h3\u003e\n\u003cp\u003eBottled CO2 enrichment normally means calculating flow rates, pressures and on\/off timings by hand — get any of them wrong and gas is wasted or CO2 levels never reach a useful concentration. The Unis removes that calculation entirely: the regulator's flow rate is fixed at the factory to match each of the controller's 16 settings, so choosing the right number for your room size is the only decision left. It was the first dedicated CO2 controller sold on the UK market, and the same set-and-forget design still holds up against far pricier systems.\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eConnect the regulator to the control panel with the supplied wire, then screw the regulator onto your CO2 bottle — fit the washer first and tighten with a spanner for an airtight seal. Select the setting that matches your growing area's volume in cubic metres, and wire the Unis through a timer so CO2 dosing switches off with your lights, matching the plant's natural CO2 uptake cycle. Running an extraction fan? Choose a slightly higher setting to allow for CO2 pulled out through the ducting, and run CO2 tubing out to the canopy in medium and large rooms to cut down on wastage.\u003c\/p\u003e\n\u003cdiv class=\"hcs-specs\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSettings:\u003c\/strong\u003e 16, covering 1m³ to 100m³ grow room volumes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulator:\u003c\/strong\u003e pre-set horticultural CO2 regulator with integrated pressure and gas-remaining gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e screw-fit to a standard CO2 gas bottle, sealing washer included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl type:\u003c\/strong\u003e microprocessor-based timed dosing via connected solenoid emitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e mains, switched via an external timer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e","brand":"Ecotechnics","offers":[{"title":"Default Title","offer_id":53798857900298,"sku":"PRP-ECOT-001-01","price":167.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/ecotechnics-unis-co2-controller-full-emitter-kit-1.jpg?v=1790169237","url":"https:\/\/hydrocropshop.co.uk\/products\/ecotechnics-unis-co2-controller-full-emitter-kit","provider":"Hydro Crop Shop","version":"1.0","type":"link"}