{"product_id":"gas-high-humidity-replacement-sensor","title":"G.A.S High Humidity Replacement Sensor – PTFE Coated Probe","description":"\u003ch2\u003eThe probe that keeps reading in a wet room\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eG.A.S High Humidity Replacement Sensor\u003c\/strong\u003e is the \u003cstrong\u003eGSE probe\u003c\/strong\u003e built for rooms that sit at \u003cstrong\u003e80%+ RH\u003c\/strong\u003e, where an ordinary sensor saturates and stops telling the truth. G.A.S took it from the \u003cstrong\u003emushroom growing industry\u003c\/strong\u003e, where sustained high humidity is the normal working condition, and adapted it for their own controllers. A \u003cstrong\u003ePTFE covering\u003c\/strong\u003e keeps liquid off the element, so the probe carries on reading where a standard one would drift or fail outright.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for sustained high humidity\u003c\/strong\u003e, not merely rated to survive it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithstands partial or total submersion\u003c\/strong\u003e — dry it out and it reads accurately again\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePTFE protective covering\u003c\/strong\u003e stops liquid saturation and mechanical failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine GSE sensor\u003c\/strong\u003e rather than a generic substitute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo fittings available\u003c\/strong\u003e so it matches the controller you already own\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich fitting do I need?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnviro \u0026amp; IHC.\u003c\/strong\u003e For G.A.S environmental controllers and the Intelligent Humidity Controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC-EC.\u003c\/strong\u003e For the AC-EC controller, which drives your extraction whatever the fan's power type\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStandard probes dying in your room?\u003c\/h3\u003e\n\u003cp\u003eA probe sited \u003cstrong\u003enear a humidifier\u003c\/strong\u003e, caught by \u003cstrong\u003efoliar spraying\u003c\/strong\u003e, or simply living in a room that never drops below 80% will take on moisture, and once the element is saturated the controller is acting on numbers that are no longer real. That shows up as \u003cstrong\u003efans running at the wrong speed\u003c\/strong\u003e, humidity corrections that never arrive, and a controller that looks like it has failed when the sensor feeding it is the part that went. This probe is the answer to a room that keeps killing probes.\u003c\/p\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn off and unplug the \u003cstrong\u003econtroller\u003c\/strong\u003e at the wall.\u003c\/li\u003e\n\u003cli\u003eDisconnect the existing probe from the sensor port.\u003c\/li\u003e\n\u003cli\u003ePlug the \u003cstrong\u003ehigh humidity probe\u003c\/strong\u003e into the same port.\u003c\/li\u003e\n\u003cli\u003eSite the sensor at \u003cstrong\u003ecanopy height\u003c\/strong\u003e, clear of direct spray from a humidifier.\u003c\/li\u003e\n\u003cli\u003ePower the controller back up and check the reading settles before relying on it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e G.A.S (GSE probe)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e sustained 80%+ RH environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e PTFE covering against liquid saturation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery:\u003c\/strong\u003e dries back to accurate readings after submersion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Enviro \u0026amp; IHC, or AC-EC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"G.A.S","offers":[{"title":"Enviro \u0026 IHC","offer_id":53777577017610,"sku":"ENV-GASX-062-01","price":167.99,"currency_code":"GBP","in_stock":true},{"title":"AC-EC","offer_id":53777577050378,"sku":"ENV-GASX-062-02","price":167.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/CONT-RP-HH.webp?v=1789951928","url":"https:\/\/hydrocropshop.co.uk\/products\/gas-high-humidity-replacement-sensor","provider":"Hydro Crop Shop","version":"1.0","type":"link"}