{"product_id":"trolmaster-aqua-x-water-detector-wd-2","title":"Trolmaster Aqua-X Water detector (WD-2)","description":"\u003cp data-start=\"45\" data-end=\"429\"\u003eThe TrolMaster WD-2 Water Detector is designed to provide early leak detection within indoor growing environments. Water leaks from irrigation systems, reservoirs or plumbing can quickly cause damage to equipment and disrupt hydroponic systems. The WD-2 helps protect your grow room by detecting water on the floor and sending an alert through the connected TrolMaster control system.\u003c\/p\u003e\n\u003cp data-start=\"431\" data-end=\"788\"\u003eWhen connected to a Hydro-X controller, the WD-2 continuously monitors the area where it is installed. If water is detected, the system immediately sends an alert to notify the grower, allowing quick action before the issue escalates. This added protection helps prevent damage to electrical equipment, climate control systems and hydroponic infrastructure.\u003c\/p\u003e\n\u003cp data-start=\"790\" data-end=\"967\"\u003eLeak detection is particularly important in automated irrigation setups where pumps, valves and reservoirs operate continuously during vegetative growth and the flowering stage.\u003c\/p\u003e\n\u003cp data-start=\"969\" data-end=\"985\"\u003e\u003cstrong data-start=\"969\" data-end=\"985\"\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"987\" data-end=\"1442\"\u003e• Detects water leaks or flooding in grow rooms and hydroponic systems\u003cbr data-start=\"1057\" data-end=\"1060\"\u003e• Integrates directly with the TrolMaster Hydro-X control system\u003cbr data-start=\"1124\" data-end=\"1127\"\u003e• Sends alerts when water is detected on the floor or monitored area\u003cbr data-start=\"1195\" data-end=\"1198\"\u003e• Helps protect equipment and irrigation systems from water damage\u003cbr data-start=\"1264\" data-end=\"1267\"\u003e• Supports connection of multiple detectors within one control system\u003cbr data-start=\"1336\" data-end=\"1339\"\u003e• Plug \u0026amp; play installation with RJ12 connectivity\u003cbr data-start=\"1388\" data-end=\"1391\"\u003e• Ideal for automated indoor growing environments\u003c\/p\u003e\n\u003cp data-start=\"1444\" data-end=\"1475\"\u003e\u003cstrong data-start=\"1444\" data-end=\"1475\"\u003eHow It Solves Grow Problems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1477\" data-end=\"1749\"\u003eWater leaks in indoor growing setups can go unnoticed for hours or even days, especially in automated irrigation systems. Leaks from reservoirs, pumps or plumbing can damage electrical equipment, disrupt irrigation cycles and create unsafe conditions inside the grow room.\u003c\/p\u003e\n\u003cp data-start=\"1751\" data-end=\"1930\"\u003eThe WD-2 provides early warning by detecting water as soon as it reaches the sensor. Once detected, the Hydro-X system can notify the grower so the issue can be addressed quickly.\u003c\/p\u003e\n\u003cp data-start=\"1932\" data-end=\"2122\"\u003eThis protection helps maintain stable environmental conditions and prevents costly equipment damage, ensuring hydroponic systems continue operating reliably throughout the entire grow cycle.\u003c\/p\u003e\n\u003cp data-start=\"2124\" data-end=\"2140\"\u003e\u003cstrong data-start=\"2124\" data-end=\"2140\"\u003eKit Contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"2142\" data-end=\"2250\"\u003e• 1 × Water Detector (WD-2)\u003cbr data-start=\"2169\" data-end=\"2172\"\u003e• 1 × Touch Spot sensor pad\u003cbr data-start=\"2199\" data-end=\"2202\"\u003e• 1 × RJ12 T-splitter\u003cbr data-start=\"2223\" data-end=\"2226\"\u003e• 1 × 16 ft RJ12 cable\u003c\/p\u003e\n\u003cp data-start=\"2252\" data-end=\"2266\"\u003e\u003cstrong data-start=\"2252\" data-end=\"2266\"\u003eHow to Use\u003c\/strong\u003e\u003c\/p\u003e\n\u003col data-start=\"2268\" data-end=\"2760\"\u003e\n\u003cli data-start=\"2268\" data-end=\"2361\"\u003e\n\u003cp data-start=\"2271\" data-end=\"2361\"\u003eConnect the WD-2 water detector to the Hydro-X controller using the supplied RJ12 cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2362\" data-end=\"2495\"\u003e\n\u003cp data-start=\"2365\" data-end=\"2495\"\u003ePlace the Touch Spot sensor pad on the floor or near areas where leaks may occur, such as reservoirs, pumps or irrigation lines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2496\" data-end=\"2574\"\u003e\n\u003cp data-start=\"2499\" data-end=\"2574\"\u003eUse the RJ12 T-splitter if connecting multiple sensors within the system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2575\" data-end=\"2641\"\u003e\n\u003cp data-start=\"2578\" data-end=\"2641\"\u003ePower on the controller and confirm the sensor is recognised.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2642\" data-end=\"2760\"\u003e\n\u003cp data-start=\"2645\" data-end=\"2760\"\u003eIf water is detected by the sensor pad, the Hydro-X system will automatically send an alert to notify the grower.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-start=\"2762\" data-end=\"2790\"\u003e\u003cstrong data-start=\"2762\" data-end=\"2790\"\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"2792\" data-end=\"2903\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e• Operating Temperature: 0–50°C\u003cbr data-start=\"2823\" data-end=\"2826\"\u003e• Maximum Humidity: ≤90%\u003cbr data-start=\"2850\" data-end=\"2853\"\u003e• Dimensions: 160 mm (L) × 86 mm (W) × 86 mm (H)**\u003c\/p\u003e","brand":"Hydro Crop Shop","offers":[{"title":"Default Title","offer_id":52715181408522,"sku":null,"price":70.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/7127\/5786\/files\/meters-sensors-trolmaster-aqua-x-water-detector-wd-2-41513748070615.webp?v=1773575842","url":"https:\/\/hydrocropshop.co.uk\/products\/trolmaster-aqua-x-water-detector-wd-2","provider":"Hydro Crop Shop","version":"1.0","type":"link"}