Airfan Hybrid Foam Box Fan – AC/EC Inline Extraction

Run it flat out on mains power, or dial it in with a controller

The Airfan Hybrid Foam Box Fan pairs a lightweight EPP foam housing with hybrid AC/EC motor technology, so it works either as a plain mains-powered fan or steps down through a dedicated hybrid speed controller for finer adjustment. Airflow reaches up to 4,250 m3/h depending on size, and it ships with a built-in junction box and capacitor for quick, safe wiring. An optional 3-speed controller with a 25 metre remote is available when you want to change speed without going near the fan.

Key Benefits

• Hybrid AC/EC motor runs as a standard mains fan or on a dedicated speed controller, so you're not locked to one fixed output
• 3,250 m3/h on the 10in (250mm) and 4,250 m3/h on the 12in (315mm)
• Lightweight EPP foam casing that dampens vibration and noise far better than a metal box
• Built-in junction box and capacitor for straightforward installation with no extra parts to source
• Optional 3-speed controller, 25 metre remote reach to adjust speed from across the room
• Strong suction from a very light unit that's easier to hang and bracket than heavy metal fans

Stuck choosing between too much extraction and not enough?

Running a fan permanently flat out wastes energy and can overcool or over-dry a room during cooler parts of the day, while an underpowered fan leaves you fighting heat and humidity under lights-on. Because this fan runs as a simple AC unit or steps down through the optional controller, you can push hard when conditions demand it and ease off when they don't.

How to Use

• Mount the fan in-line with your ducting on a firm surface or bracket
• Wire it through the built-in junction box for standard full-speed running
• Fit the optional 3-speed controller to step the fan down during cooler or low-demand periods
• Use the 25 metre remote to adjust speed without reaching the fan once installed