EasyFeed systems and parts

One tank feeds all.

EasyFeed runs a gravity-fed line of trays from a single reservoir, with a float valve holding the level. Systems arrive as a full kit, while modules add stations to a run you already own.

Nothing matches all of those filters.

Complete EasyFeed systems

Tank, trays, pots and pipework in one kit, sized 10L to 30L.

EasyFeed 16mm Large Inline Filter – For Irrigation Systems

  • Tubing compatibility standard 16mm irrigation tubing
  • Type large-capacity inline mesh filter
  • Housing screw-open for cleaning and screen replacement
  • Application gravity-fed and pumped hydroponic irrigation systems
£22.00

EasyFeed 16L System – Gravity-Fed Hydroponic Grow Kit

  • Type gravity-fed, bottom-fed hydroponic irrigation system
  • Power required none - no pump, timer or electricity
  • Suitable media coco, soil or hydroponic substrate
  • Expandable yes, add further EasyFeed containers
£155.00

EasyFeed Tray Lid – For Gravity-Fed Irrigation Systems

  • Brand EasyFeed
  • Type EasyFeed
  • Price from £2.50
  • Availability In stock
£2.50

EasyFeed 10L System – Gravity-Fed Hydroponic Grow Kit

  • Type gravity-fed, bottom-feed hydroponic system
  • Reservoir 10 litre capacity
  • Power none required (no pump or timer)
  • Media coco, soil or hydroponic substrate
£155.00

EasyFeed 22L System – Gravity-Fed Hydroponic Grow Kit

  • System type gravity-fed bottom-feed irrigation
  • Power required none (no pump, timer or electricity)
  • Media compatibility coco, soil and hydroponic substrates
  • Expandable yes, additional EasyFeed containers can be linked in
£190.00

EasyFeed 30L System – Gravity-Fed Hydroponic Grow Kit

  • System type gravity-fed, bottom-feed hydroponic irrigation
  • Power required none - no pump, timer or mains connection
  • Compatible media coco, soil, hydroponic substrates
  • Expandable yes - additional EasyFeed pots can be linked
£190.00

Expansion modules

One extra station to extend a run that is already built.

Pots, trays and coco

The consumable half: fabric pots, trays and matched coco bricks.

Pipe, filters and fittings

Green line, inline filters, valves and replacement washers.

EasyFeed 16mm Green Pipe – Anti-Kink Feed Line

£2.25

EasyFeed Hose Tail – Spare Feed Line Connector

£1.90

EasyFeed gravity-fed watering for multi-pot grows

EasyFeed waters multiple fabric pots from one tank using gravity and a low-pressure dripper line, no pump required, and a float valve keeps the header tank topped up automatically. It sits between AutoPot's fully passive top-up system and a powered dripper setup: you still need a timer to schedule feeds, but there is no pump to fail mid-cycle. The EasyFeed 16L System (from £155) is the standard starting kit and scales up pot by pot as your grow grows.

Building and maintaining the system

Fabric pots run from 10L to 30L (£4-£5.50) depending on plant size, sitting in a tray (from £10) with a tray lid (£2.50) to stop light hitting the roots and the medium drying out. An EasyFeed water timer (£29.95) schedules feed cycles, a float valve (£12) keeps the tank filled, and the inline filters (£8-£22, small to large) stop grit blocking the drippers, the most common EasyFeed fault we see in the shop. Keep a spare spanner (£3) and washers (£0.40) on hand, since fittings do need the occasional retightening.

Growers running coco in EasyFeed pots often start with an EasyFeed coco brick (£8.50), or see our coco range for other brands. For plumbing beyond the standard kit, pipe covers extra feed and drain lengths, and tanks & reservoirs if you are stepping up tank size. If you would rather skip the timer altogether, AutoPot systems work on the same gravity principle without one.

Free UK delivery over £60. Call 020 3488 0419 for help planning pot counts and tank size.