VIVOSUN AeroZesh Inline Fan – EC Mixed-Flow Extraction
VIVOSUN AeroZesh Inline Fan – EC Mixed-Flow Extraction
In stock
Order by 3pm Mon–Fri — we aim to post same day · FREE Express Delivery over £60 · 1–2 working days · Free Wembley pickup
- 14-day returns
- Price match promise
- Free Wembley store pickup
- Advice from the team: 020 3488 0419
Pairs well with
Description
Quiet EC extraction that only works as hard as your tent needs
The VivoSun AeroZesh is a mixed-flow inline duct fan built around an EC motor rather than a standard AC one, in five sizes from 4 inch (S4) to 12 inch (S12). The S4, S6 and S8 come with the E12 controller for ten PWM-controlled speed steps. It suits growers who want real extraction without the constant drone of a fan stuck on one fixed speed.
Key Benefits
- From around 360 m3/h (S4) to 2,744 m3/h (S12) from an efficient EC motor, sized for anything from a compact tent to a large room
- Ten PWM speed steps on the E12 controller (S4, S6 and S8) to set the exact output your space needs at any time
- EC motor efficiency that draws less power and runs quieter than an equivalent AC fan
- Mixed-flow design for steady airflow through ducting and carbon filters
- 4 to 12 inch duct sizes (100mm to 315mm) to match common tent and room ventilation setups
Fan either too loud or not shifting enough air?
A fixed-speed AC fan forces a choice between running flat out, which wastes energy and adds noise, or underpowering extraction and risking heat and humidity build-up. The EC motor and ten-step PWM controller let you set the AeroZesh to the precise speed the tent needs, instead of picking between too much and not enough.
How to Use
- Fit the fan in-line with your ducting, drawing air toward the carbon filter and out of the tent
- Connect it to the E12 controller (supplied with the S4, S6 and S8)
- Start on a low speed and step up until temperature and humidity settle where you want them
- Adjust through the day as conditions change
Technical Specifications
- Motor: PWM-controlled EC, mixed-flow
- Controller: E12 with ten programmable speed steps, included with the S4, S6 and S8
- Running: low-noise operation typical of EC inline fans
- Airflow, S4: 360 m³/h (212 CFM)
- Airflow, S6: 683 m³/h (402 CFM)
- Airflow, S8: 1,410 m³/h (830 CFM)
- Airflow, S10: 2,055 m³/h
- Airflow, S12: 2,744 m³/h
- Noise, S4: 28 dB(A)
- Noise, S6: 32 dB(A)
- Noise, S8: 51 dB(A)
- Power, S4: 20 W average
- Power, S6: 35 W average
- Power, S8: 75 W
- Duct size, S4: 100mm (4")
- Duct size, S6: 150mm (6")
- Duct size, S8: 200mm (8")
- Duct size, S10: 250mm (10")
- Duct size, S12: 315mm (12")
- Speed control: E12 controller, 10 PWM speed steps (S4, S6 and S8)
- Motor type: EC, dual ball bearings
Questions & answers
Which AeroZesh size do I need?
Match it to your ducting: S4 100mm (360 m3/h), S6 150mm (683 m3/h), S8 200mm (1,410 m3/h), S10 250mm (2,055 m3/h) or S12 315mm (2,744 m3/h). Size up if you run a carbon filter and a long duct.
Does it come with a controller?
The S4, S6 and S8 options include the E12 controller, which gives ten PWM speed steps so you can set the exact output the tent needs.
How does it compare with the G.A.S Air AC (RadAir)?
Both are mixed-flow inline fans built to hold airflow through a filter. The AeroZesh runs an EC motor with stepped speed control; the Air AC uses an AC motor built for dependable, continuous extraction.
How loud is it?
VIVOSUN rate the S4 at 28 dB(A), the S6 at 32 dB(A) and the S8 at 51 dB(A).
How much power does it use?
Power draw is 20W on the S4, 35W on the S6 and 75W on the S8, from an EC motor on dual ball bearings.
