Antelco Agri Drip Emitter 2L/h 100-Pack – Drip Irrigation

Steady, fixed-rate watering at every plant on the line

The Antelco Agri Drip Emitter is a 2 L/h fixed-flow dripper built around a sealed turbulent flow path, so each emitter on a run delivers the same, repeatable volume. A colour-coded base marks the flow rate, and the positive barb fits 4mm micro tube or pushes straight into 13mm or 19mm supply pipe. Made in Australia from UV-stabilised plastic, it works on gravity-fed and low-pressure systems as well as pumped lines, and suits pots, grow bags, raised beds, greenhouse benches and home-built drip or aeroponic setups.

Key Benefits

• Fixed 2 L/h flow - a slow, even drip that soaks the root zone without run-off.
• Turbulent flow path - consistent, uniform delivery along the line.
• Barbed inlet - fit it inline on supply pipe or at the end of 4mm micro tube.
• Low-pressure friendly - works from a raised reservoir or rainwater tank as well as a pump.
• Colour-coded base - tell 2 L/h emitters from other flow rates at a glance.
• UV-stabilised for long service in greenhouses and outdoors.

Uneven Watering Across Your Plants?

Hand watering and cheap drippers leave some pots sodden and others dry. Waterlogged roots are starved of oxygen, while dry pots stall growth and nutrient uptake. Fixed-flow emitters give every plant the same volume on every cycle, so feeding stays consistent from the first pot to the last.

How to Use

• Inline: punch a hole in 13mm or 19mm supply pipe and push the barb in firmly.
• Remote: run 4mm micro tube from the supply line to the plant and fit the emitter on the end, held with a stake.
• Plan the run: group plants with similar water needs on one line; use two emitters on larger pots.
• Keep it clean: run water through new pipe before fitting, filter the supply and clean lines between grows to stop blockages.

Technical Specifications