Description
Move serious volumes of water without a weak-flow bottleneck
The AquaKing Q800103 is a high-output submersible water pump supplied with a hose adaptor, built for feeding large NFT and drip systems, filling reservoirs and shifting water around bigger indoor setups. With a maximum flow of 5,500 L/h and a 30 m maximum head, it holds pressure consistent even where water has to travel a distance or climb to an elevated tank.
Key Benefits
- 5,500 L/h maximum flow for large NFT, drip and recirculating systems
- 30 m maximum head height for elevated beds or long pipe runs
- 800W motor for reliable continuous-duty operation
- IPX8 fully submersible build with up to 7 m immersion depth
- Hose adaptor included for quick connection to a 1-inch threaded outlet
- 10 m cable for flexible reservoir placement
Beat uneven feed across a large system
An undersized pump leaves parts of a system starved of nutrient solution while others flood, showing up as dry spots, patchy growth and roots that never get steady oxygen. The Q800103's flow and head hold pressure right across the layout, so every plant draws an even supply.
How to Use
- Position the pump fully submerged in a clean water or nutrient reservoir.
- Fit the supplied adaptor and connect your irrigation hose or pipework securely.
- Connect to a suitable mains supply, switch on and check for a steady flow.
- Clean the intake regularly to prevent blockages; note the 0.5 mm maximum particle size.
- Never run the pump dry, as this will damage the motor.
Technical Specifications
- Pump type: submersible water pump
- Maximum flow rate: 5,500 L/h
- Power consumption: 800W
- Maximum head height: 30 m
- Maximum immersion depth: 7 m
- Maximum liquid temperature: 35C
- Outlet connection: 1-inch threaded outlet with hose adaptor
- Cable length: 10 m
- Maximum particle size: 0.5 mm
- Protection rating: IPX8
