Dimlux Interlink Cable for Maxi Controller Grow Light Setups

Link Every Fixture Back to One Controller

Interlink cables are the wiring that ties a Dimlux lighting setup together. They daisy chain fixtures to one another and connect the chain to the Dimlux Maxi Controller, giving you dimming, timing and the controller's protection features across the whole room from a single point. Four lengths are stocked, 2m, 2.5m, 5m and 10m, so you can use short runs between neighbouring lamps and a long run back to the controller. Buy the lengths that suit your layout rather than coiling excess cable above the canopy.

Key Benefits

• Centralised control - one controller drives every linked fixture instead of setting each lamp by hand.
• Simple daisy chain - fixtures link one to the next, so the wiring stays tidy and logical.
• Four lengths - 2m, 2.5m, 5m and 10m cover short lamp-to-lamp hops and long runs back to the controller.
• Right length, less clutter - choosing the correct run avoids loops of spare cable over the canopy.
• Genuine Dimlux part - correct connectors and pin-out for the fixtures and controller.

The Snag with Controlling Lights One by One

Set each fixture individually and the room drifts. One lamp gets dimmed and forgotten, another comes on a few minutes out of step, and nothing responds together when the room runs hot. Linking the fixtures means a single instruction reaches all of them at once, and the controller's safety features apply to every lamp rather than just the one you remembered to set.

How to Use

• Plan the run first and measure the distance between each fixture and the controller.
• Isolate the lights at the mains before connecting or disconnecting cables.
• Link fixture to fixture with the shorter cables, then run the last leg back to the controller.
• Support the cable clear of ballasts, ducting and hot surfaces.
• Power up and confirm each fixture is reporting to the controller.

Specifications