Description
A One Metre Square Tent With a Full Two Metres of Headroom
The Green Box Tent 100 x 100 x 200 gives you a 1m x 1m floor with 2m of height – the classic size for a single light over a handful of plants in a spare room, cupboard space or garage corner. The outer is 600D oxford cloth, double stitched with strengthened corners, and every inside surface is lined with 620D diamond mylar, which scatters light back onto the canopy so the corners grow as evenly as the centre. The frame is steel throughout, with push-and-click poles, heavy-duty steel corners and steel roof hangers on silicone pads, so a light, carbon filter and fan can hang from the roof without the frame bowing. Double-cuffed duct sockets high and low and mesh-screened vents with lightproof flaps let extraction clear heat and humidity while keeping the tent fully light-tight.
Key Benefits
- 1m x 1m footprint at 2m high – room for one light and tall plants
- 620D diamond mylar lining for an even spread of light to the edges
- 600D oxford cloth, double stitched with reinforced corners
- Steel push-and-click frame with heavy-duty corners and steel roof hangers
- Double-cuffed duct sockets top and bottom plus lightproof mesh vents
- Removable mylar floor liner and an outer pocket for a thermo-hygrometer
How to Use
- Clear a level floor at least 1.2m x 1.2m and build the steel frame first, clicking each pole fully home.
- Pull the cover over the frame, close every zip and check for light leaks with a light on inside and the room dark.
- Hang the light, carbon filter and fan from the steel roof hangers or hanging straps, never from the fabric.
- Extract from an upper duct socket and let fresh air in low down, tightening the double cuffs around the ducting.
- Lay the floor liner before the pots go in and lift it out to clean between runs.
Technical Specifications
- Dimensions (cm): 100 x 100 x 200
- Frame: Steel poles, push-click, 25mm steel corners
- Fabric: 600D Oxford black cloth
- Lining: 620D diamond Mylar
- Brand: Green Box Tents
- Floor area: 1m²
- Outer fabric: 600D oxford black cloth, double stitched with reinforced corners
- Inner lining: 620D diamond mylar, lightproof
- Floor: removable mylar floor liner
- Roof: steel roof hangers with silicone pads, roof hanging straps
- Ventilation: double-cuffed upper and lower duct sockets, mesh-screened vents with lightproof flaps
- Extras: outer thermometer/hygrometer pocket, heavy-duty branded zips, main door clips
- Materials: non-toxic, 100% PVC-free
- Weight: 15kg
Frequently Asked Questions
How many plants fit in a 1m x 1m tent?
Typically one to four, depending on pot size and how you train them – four plants in pots of around 9–11 litres, or one or two in larger pots.
What size light suits it?
Choose a fixture made to cover a 1m x 1m (3 x 3ft) footprint, and check its hanging height against the 2m tent height once your pots and fan are in place.
How much space do I need around it?
The tent is 1m square, but leave room to open the doors, run ducting and reach in – about 1.2m x 1.2m of clear floor and a little height above the roof.
Works Well With
