Green Box Tent 200 x 200 x 200 – 2m x 2m Grow Tent

Four square metres of lightproof growing space

The Green Box Tent 200 x 200 x 200 is a 2m x 2m grow tent with a full 2m of headroom, built from 600D oxford cloth outside and 620D diamond mylar inside. A square footprint makes it simple to split into four even zones under the lights, keeping the canopy level from corner to corner. The steel frame clicks together without tools and the roof hangers carry lights, a carbon filter and fans, while upper and lower duct sockets and screened vents let you pull stale, humid air out and draw fresh air in, so heat and humidity stay under control through vegetative growth and flowering.

Key Benefits

• 2m x 2m footprint, 4m² of floor for a square, evenly lit canopy
• 620D diamond mylar lining bounces light back to the plants instead of losing it to the walls
• 600D oxford outer with double stitching and reinforced corners resists stretching and tears
• Steel roof hangers with silicone pads and an uplift irrigation bar take the weight of lights and feed lines
• Upper and lower duct sockets with double cuffs, plus lightproof mesh vents, for proper airflow
• Removable floor liner catches spills and lifts out for cleaning

How to Use

• Clear a level floor at least 2.2m x 2.2m and build the steel frame first, clicking each pole fully home before fitting the cover.
• Draw the cover over the frame, close every zip and check for light leaks with the lights on inside and the room dark.
• Hang lights, carbon filter and fans from the steel roof hangers or the hanging straps, not from the fabric.
• Run extraction from the upper duct sockets and passive or fan-assisted intake low down, and tighten the double cuffs round the ducting.
• Lay the removable floor liner before pots go in, and lift it out to clean between runs.

Technical Specifications