Green Box Tent 240 x 120 x 200 – 2.4 x 1.2 m Grow Tent

A long, narrow tent that fits where a square one will not

The Green Box Tent 240 x 120 x 200 gives you 2.4m x 1.2m of floor at 2m high, the classic shape for running two lights end to end or a single row of plants along a wall, in a box room or a loft with limited depth. The outer is 600D oxford cloth and the lining 620D diamond mylar, so the light you pay for stays on the canopy. Duct sockets top and bottom and screened vents with lightproof flaps let extraction clear heat and humidity along the full length of the tent, avoiding the stagnant corners that encourage mould.

Key Benefits

• 2.4m x 1.2m footprint for two lights in a row or a long single line of pots
• 620D diamond mylar interior for even light spread down the full length
• 600D oxford cloth, double stitched with strengthened corners
• Steel push-and-click frame with heavy-duty corners and steel roof hangers
• Double-cuffed duct sockets high and low, plus lightproof mesh vents
• Outer instrument pocket so temperature and humidity can be read without opening up

How to Use

• Clear a level floor at least 2.6m x 1.4m and build the steel frame first, clicking each pole fully home before fitting the cover.
• Draw the cover over the frame, close every zip and check for light leaks with the lights on inside and the room dark.
• Hang lights, carbon filter and fans from the steel roof hangers or the hanging straps, not from the fabric.
• Run extraction from the upper duct sockets and passive or fan-assisted intake low down, and tighten the double cuffs round the ducting.
• Lay the removable floor liner before pots go in, and lift it out to clean between runs.

Technical Specifications