Green Box Tent 600 x 300 x 220 – 6m x 3m Grow Tent

A 6m walk-in room for a full production run

The Green Box Tent 600 x 300 x 220 turns a garage or unit into a sealed grow room: 6m x 3m of floor, 18m², under a 2.2m roof. Run two rows of lights down the length with a working aisle between them, or divide it into a vegetative end and a flowering end with separate lighting schedules on the same extraction. Greenbox use 600D oxford cloth over a 620D diamond mylar lining and a steel push-and-click frame with heavy-duty corners, and the whole room ships crated on a pallet. Each long wall carries 12-inch duct sockets high and low, 3-inch cable ports and lightproof mesh vents, so you can place intake and extraction where the heat actually builds rather than where the tent allows.

Key Benefits

• 6m x 3m floor, 18m², room for two rows and an aisle
• 2.2m height for hanging equipment well clear of the canopy
• 620D diamond mylar interior for reflectivity down the whole length
• 12-inch duct sockets and mesh vents spread along every wall
• Heavy-duty steel corners and roof hangers for a stable, loaded frame
• Removable floor liner to catch spills and lift out for cleaning

How to Use

• Clear a level floor of at least 6.2m x 3.2m and unpack the crate beside it; the steel tubes are numbered, so lay them out against Greenbox's frame drawing before you start.
• Build the frame with two people, clicking every joint fully home, then draw the cover over from one end and close the zips.
• Hang lights, carbon filters and fans from the steel roof hangers and straps, never from the fabric.
• Run extraction from the upper 12-inch sockets and intake from the lower ones, and cinch the double cuffs tight round the ducting.
• Fit the floor liner before the pots go in, then check for light leaks with the lights on inside and the room dark.

Technical Specifications