Mammoth TT Twin Speed Inline Fan – Grow Room Extraction

Two Speeds, One Fan, Year-Round Extraction

A single-speed extractor is wrong half the year: too weak in a July heatwave, too strong in January when it strips heat and humidity out. The Mammoth TT solves that with a two-speed switch, so you run high through summer and back it off through winter. These are high pressure fans that hold flow through a filter and ducting rather than stalling, supplied plug and play with a power lead included.

Key Benefits

• Twin speed control: switch between two airflow rates to suit summer and winter temperatures
• High pressure performance: holds airflow through filters and ducting, with very little noise
• IP65 rated: dustproof and waterproof for humid rooms
• Thermal overheat protection: the motor cuts out rather than cooking itself
• Quick release mechanism: pops apart for easy impeller cleaning
• 2 year manufacturer warranty: quality components, backed
• Sizes for every room: 100mm (4in) at 165 m3/h up to 315mm (12in) at 2206 m3/h

Is Your Room Too Hot in Summer and Too Cold in Winter?

A fan stuck flat out drags temperature and humidity below target in winter, causing slow growth and sluggish nutrient uptake. Undersize it and summer heat builds, flowers go airy and plants stretch. Two speeds match extraction to your lighting load and the weather.

How to Use

Fit the fan inline between your carbon filter and the exhaust, ideally at the far end of the duct run so the ducting sits under negative pressure and stays quiet. Size it to your lighting load: 100mm (4in) at 165 m3/h or 198 m3/h suits up to 1 x 400W, 125mm (5in) at 248 m3/h or 284 m3/h suits up to 1 x 600W, and 150mm (6in) at 410 m3/h or 530 m3/h handles up to 2 x 600W. Room shape, size and light type all shift this, so allow headroom. Run high in warm weather, drop to low as temperatures fall, and clean the impeller periodically.