Description
Add a slim, linkable strip of full-spectrum light exactly where it's needed
The Maxibright Daylight LED Pro Strip is a stand-alone LED bar built around Lumileds white and Osram red diodes, running at 2.8 µmol/J for genuinely efficient output. It works on its own over a propagation tray or vertical rack, or alongside a full Daylight LED fixture to top up light where a tent's output naturally falls away toward the edges. With its own external driver and a 0–10V linkable connection, several bars can be run and dimmed together from a single controller.
Grow tents and multi-tier racks both create dim corners and shaded lower shelves that one central fixture cannot reach evenly, leaving weaker growth wherever the light falls off. A Pro Strip mounted at that point restores even coverage without the cost or heat of a second full fixture.
Key Benefits
- 2.8 µmol/J efficiency — full-spectrum output for strong plant response per watt drawn
- 0–10V linkable dimming — connect multiple strips and run them as one array
- Low-profile aluminium body — fits tight rack shelving and narrow tent corners a bulkier fixture can't reach
- Silent, passive cooling — no fans or moving parts
- IP65-rated — built for the humidity of a propagation area or misted canopy
- Manual and remote dimming — knob control at Off/25/50/75/100%, or 20–100% from a compatible Daylight lighting controller
How to Use
- Propagation and clones: run a single 60W strip low over trays for steady, even light without excess heat
- Vertical farming and multi-tier racks: mount one strip per shelf and link them in series to a shared controller
- Supplementary lighting: position alongside an existing Daylight LED or HID fixture to lift output at the canopy edge
- Dimming: use the onboard knob for quick manual settings, or wire into a Daylight Lighting Controller for remote 20–100% control across several linked bars
Technical Specifications
- Dimming: manual knob (Off/25/50/75/100%) and 0–10V remote (20–100%), linkable
- IP rating: IP65
- Build: aluminium housing, external driver, no fans
- Input voltage: 220–240V AC
| By size | 60W | 100W |
|---|---|---|
| Input power | 60W | 100W |
| PPF | 168 µmol/s | 280 µmol/s |
| Efficacy | 2.8 µmol/J | 2.8 µmol/J |
| Coverage | Propagation / supplementary bar | Propagation / supplementary bar |
| Dimensions | 90 x 5.4 x 2.1cm | 112 x 5.3 x 2cm |
| Weight | 2.1kg | 2.7kg |
Questions & answers
What wattages are there?
60W (90cm long, 168 µmol/s) and 100W (112cm long, 280 µmol/s), both at 2.8 µmol/J.
Can I dim it?
Yes, with the knob at Off, 25, 50, 75 or 100%, or from 20–100% over 0–10V from a compatible Maxibright Daylight lighting controller. Several strips can be linked and dimmed together.
How is it different from a Cosmorrow kit?
Each Pro Strip is a standalone bar with its own external driver, so you can add one at a time. Cosmorrow bars run as a set from a shared 24V power supply.
Is it suitable for humid propagation areas?
Yes. It's IP65 rated and passively cooled with no fans, so it also runs silently.
Can it be used as a supplementary light?
Yes. Mount it beside a main fixture to lift light at the edges of a tent, or fit one per shelf on a multi-tier rack.
