Description
Maxibright Daylight Replacement Dimmer Switch – Genuine Fit, Plug-and-Play
This is the genuine replacement dimmer switch for the Maxibright Daylight LED range, fitting the 480W, 660W and 1030W fixtures. If the original control unit has failed or been damaged, this drops straight in without any rewiring — unplug the old unit and connect the new one in its place.
Key Benefits
- Genuine fit for Daylight 480W, 660W and 1030W LED fixtures — no adapting or rewiring needed.
- Simple rotary dial with fixed Off, 25%, 50%, 75% and 100% output settings, so output is repeatable every time you set it.
- Plug-and-play connector on a long lead, so the dial can sit within easy reach outside the tent or canopy.
- Keeps an ageing fixture running without the cost of replacing the whole light over one failed control unit.
How to Use
Disconnect the fixture from the mains before fitting. Unplug the old dimmer's connector from the fixture's control lead, plug this replacement in its place, and mount the housing wherever it's easiest to reach — the lead is long enough to route outside a tent. Turn the dial to Off before powering the fixture back up, then select 25%, 50%, 75% or 100% output as your growth stage requires.
Technical Specifications
- Compatibility: Maxibright Daylight 480W, 660W and 1030W LED fixtures
- Control type: rotary dial, fixed positions (Off / 25% / 50% / 75% / 100%)
- Connection: plug-and-play, no rewiring
- Fitting: wall or frame mountable via the housing's mounting tabs
