Maxibright Universal Lighting Controller – LED Light Dimmer

Maxibright Universal Lighting Controller – One Unit, Every 0-10V Fixture

The Maxibright Universal Lighting Controller brings programmable, master-station control to any 0-10V dimmable grow light, including the full Varidrive and Gorilla LED ranges. Instead of setting each fixture by hand, you dial in power levels, timing and temperature limits once on the controller's backlit LCD and every connected light follows it.

Key Benefits

• Programmable lighting schedules set precise on and off times and output percentage for every stage of growth.
• Sunrise and sunset simulation ramps output up and down gradually instead of switching abruptly, reducing stress on the crop.
• Temperature-responsive protection automatically dims or shuts fixtures down if the room runs over a set threshold, protecting both plants and hardware.
• Integrated temperature and humidity sensor feeds live environmental readings straight to the display, no separate meter needed.
• Backlit LCD with simple menu navigation makes setup and day-to-day adjustment straightforward, even mid-cycle.

Keeping Every Fixture In Step

Running several 0-10V lights off separate timers is how grow rooms end up with fixtures firing out of sync, no shared heat cut-off, and manual re-programming every time the schedule changes. A single universal controller solves that by governing every compatible fixture from one point, so a change to the schedule or a heat-triggered dim applies everywhere at once.

How to Use

Wire each 0-10V dimmable fixture to the controller following its 0-10V input, set your desired on/off times, target power percentage and sunrise/sunset ramp length through the LCD menu, then set the dim and stop temperatures to match your room's tolerance. The controller holds these settings and applies them continuously, so once configured it needs only occasional checking or adjustment as the crop moves between stages.

Technical Specifications