Description
Run several Dynamic fixtures from one mains feed
The Telos Power Link Kit lets one plug feed a row of Telos Dynamic lights instead of one socket per fixture. In a multi-light room that is the difference between a tidy chain and a wall of extension leads.
What's Included
- Power Link T-connector. Splits mains power between the connected fixtures
- 2m Power Link cable. Joins one fixture to the next with a push-fit connection
Key Benefits
- One mains feed for the chain, so sockets and timers are not duplicated per light
- 2m between fixtures, enough to hang on proper centres rather than to suit the cable
- Push-fit connectors that seat firmly and come apart for a re-hang
- Less cable on the floor, which is fewer things to catch and damage
A socket for every fixture is how rooms get untidy
One lead per light means a bank of adaptors, a trip hazard and a switch-on surge through a single extension. Chaining the fixtures puts the load on one properly rated feed and leaves the room walkable.
How to Use
- Connect the T-connector to the mains feed for the row.
- Run the 2m Power Link cable from the T-connector to the first fixture.
- Add one kit per additional fixture to extend the chain.
- Check the total load against the circuit before switching on — chaining does not raise what the feed can carry.
Technical Specifications
- Contents: Power Link T-connector, 2m Power Link cable
- Works with: Telos Dynamic fixtures
- Connection: Push-fit
- Cable length: 2m
- Quantity needed: One kit per additional fixture
