TrolMaster - Green-X Green House Base Station (GCS-1)

One base station to run climate, irrigation and lighting across a working greenhouse

The TrolMaster Green-X GCS-1 is a modular greenhouse automation base station that pulls climate, irrigation and lighting control onto a single platform. It reads live conditions through connected sensors and drives device modules in response, so a greenhouse exposed to shifting outdoor weather holds steady instead of chasing every swing. The kit ships with the 4-in-1 MBS-GH sensor measuring temperature, humidity, CO2 and day/night, and supports PPFD monitoring for lighting. Add compatible modules and it extends to root-zone moisture, nutrient EC and pH for full environmental oversight.

What's Included

• Green-X Greenhouse Controller (GCS-1) base station
• 4-in-1 Environmental Sensor (MBS-GH) - temperature, humidity, CO2 and day/night detection
• RJ12 cable set for light connection
• 12V power adapter
• RJ12 T-splitter

Key Benefits

• Single-platform control of greenhouse climate, irrigation and lighting
• Modular expansion - connect a wide range of TrolMaster sensors and device modules as your setup grows
• 4-in-1 sensing of temperature, humidity, CO2 and day/night in one probe
• PPFD monitoring for precise, canopy-consistent lighting control
• Extendable to the root zone - moisture, EC and pH with compatible sensors
• Dynamic automation that reacts to internal and external conditions together

Weather swings pushing your greenhouse out of range before you notice?

A greenhouse lives and dies by the outdoor weather - a burst of sun or a cold snap can drag temperature and humidity out of range in minutes, stalling growth and nutrient uptake. The Green-X watches inside and outside conditions and automatically adjusts lighting, ventilation and climate equipment to keep the growing environment stable through veg and flower.

How to Use

1. Install the Green-X base station in the greenhouse control area and connect the 12V adapter.
2. Connect the included 4-in-1 MBS-GH sensor to monitor internal conditions.
3. Add compatible sensors as needed - PPFD, smoke or water detection.
4. Link device modules for irrigation, ventilation, lighting or climate equipment.
5. Set your target ranges and schedules on the controller interface.
6. Monitor and fine-tune through the growing cycle as the seasons change.