TrolMaster Hydro-X BM-1 Weatherproof Box – Protective Enclosure for TS-1, HS-1 & ARS-1 Controllers

Keep your climate controller dry in a spray-prone grow room

The TrolMaster BM-1 Weatherproof Box is a protective enclosure that shields sensitive Hydro-X control modules from moisture in humid or spray-prone grow rooms and greenhouses. Rooms running irrigation, humidifiers or misting lines expose electronics to drips and airborne spray, and a controller that fails mid-cycle takes your whole automation setup down with it. The BM-1 houses the module in a durable sealed housing rated against dripping water and low-pressure spray, so temperature, humidity and environmental control keep running reliably.

Key Benefits

• Weather-resistant housing built specifically for humid grow room and greenhouse conditions
• Protects against dripping water and low-pressure spray from irrigation, misting and humidifiers
• Fits TS-1, TS-2, HS-1 and ARS-1 TrolMaster Hydro-X modules
• Mounting holes for quick, tidy installation in a grow tent or grow room
• Compact enclosure at just 138 x 170 x 64 mm for a neat equipment layout

Worried about moisture reaching your controller?

In high-humidity rooms, irrigation runoff, misting and accidental splashes find their way into exposed electronics. An affected controller can malfunction or fail, disrupting climate and ventilation control and putting the crop at risk. The BM-1 seals the module inside a protective box, cutting the risk of water damage so the rest of the environmental system stays stable through the entire grow cycle.

How to Use

1. Mount the BM-1 in a suitable spot in the grow room or greenhouse, ideally away from direct spray.
2. Fit the compatible TrolMaster controller (TS-1, TS-2, HS-1 or ARS-1) inside.
3. Route power and control cables through the enclosure openings.
4. Secure the controller and close the lid to seal it against moisture.