TrolMaster - Program Timer Module / Program Device Station (DSP-2)

Precise timed control for pumps and equipment

The TrolMaster DSP-2 Program Device Station is a plug-and-play timer module that gives growers precise time-based control over pumps, fans and other equipment inside a grow tent or grow room. Built for the TrolMaster Hydro-X, Tent-X and Aqua-X controllers, it plugs in via RJ12 and switches a single device up to 10 amps at 120V, integrating equipment scheduling into your main control system.

Fixing inconsistent irrigation timing

Manual pump control and equipment left running longer than necessary lead to dry root zones, uneven feeding and wasted resources. For Aqua-X hydroponics, the DSP-2 automates irrigation schedules or acts as a master pump controller, delivering water and nutrients exactly when needed to support root development and nutrient uptake. In Hydro-X or Tent-X setups it gives precise control of timed equipment such as pumps or airflow devices, stabilising the environment through both vegetative growth and flowering to reduce plant stress and protect yield.

How to Use

1. Connect the DSP-2 to your Hydro-X, Tent-X or Aqua-X controller using the RJ12 cable.
2. Assign the module an address within the controller interface.
3. Plug the device you want to control (max 10A at 120V) into the DSP-2 outlet.
4. Program the timer schedule in the controller software.
5. For irrigation, configure it as a scheduled timer or recycling timer.
6. To use as a master pump in Aqua-X, connect the DSP-2 to the 24VAC module so the pump activates automatically when irrigation zones run.