Description
Flexible, tear-resistant airflow for tight duct runs
The Vortex White Combi Ducting channels air to and from the grow area, replenishing CO2 and clearing excess heat and humidity. Its double-layered construction pairs an aluminium inner layer with a tough plastic outer skin, giving real resistance to tearing and kinking compared with foil-only ducting, while the flexible corrugated wall lets it follow tight bends without collapsing the airflow.
Key Benefits
- Double-layered build — aluminium inner bonded to a tear-resistant plastic outer.
- Fire-resistant materials, tested to VOC standards and releasing no toxic gases.
- Lightweight and flexible — no tools or cutting required to fit.
- Cost-effective noise reduction — a cheaper, more flexible alternative to a rigid silencer.
- Easy connection to fans, filters and vents with a standard duct clamp.
A loose or kinked duct run bleeds airflow and lets heat and humidity build up faster than the fan can clear it, whatever the fan is rated to move. Running a properly sized, undamaged length end to end keeps static pressure low and the whole ventilation system working as intended.
How to Use
- Connect: slide the duct end over the fan, filter or vent spigot and secure with a duct clamp or cable tie.
- Route: keep runs as short and straight as practical — every bend adds resistance the fan has to work against.
- Support: avoid letting long runs sag, which pinches the internal diameter and cuts airflow.
Technical Specifications
- Type: combi ducting, double layer
- Construction: aluminium inner, plastic outer
- Colour: white
- Light: blocks light leaks
- Fire safety: fire-tested; no toxic gases
- Standards: conforms to VOC standards
- Fitting: duct clamp; no tools needed
- Use: fans, filters and vents
| By size | 10" - 5M | 4" - 10M |
|---|---|---|
| Diameter | 10 in (254 mm) | 4 in (102 mm) |
| Length | 5 m | 10 m |
| Dimensions | Ø25.4 x 500cm | Ø10.2 x 1000cm |
