Description
Grow Space Without the Grow-Shop Price Tag
The BudBox Lite is BudBox's entry-level grow tent range, built by the same UK-founded manufacturer behind the heavier-duty BudBox Pro line but stripped back to the essentials a first-time or budget-conscious grower actually needs. A cheap tent that lets light leak through the seams, buckles under a decent light and fan, or lets humidity pool in the corners costs more in lost growth than it saved at checkout - the Lite range avoids that with a tough, double-stitched canvas, a reflective silver Mylar interior and a pole frame rated D16mm on the smaller and mid sizes, stepping up to reinforced steel corners and full D19mm poles with all-metal connectors on the largest tents, where the extra load of bigger lights and fuller canopies needs it.
The range runs from a 40cm propagation tent to a 3m x 3m grow room, with shorter 180cm and 90cm-tall versions for lofts, cupboards and spare rooms where a standard 2m tent will not stand. From 120x240cm upwards the tents add a second front door and a side access door for reaching the back of the canopy, and the three largest sizes step up to 315mm extraction ports so a bigger fan can keep airflow and temperature under control.
Key Benefits
- Reflective Mylar lining bounces light back onto the canopy instead of losing it through dark canvas walls
- Double-stitched, light-tight seams keep stray light out during the dark period and nutrient run-off in
- Interlocking pole frame - push-fit plastic corners on the smaller tents, reinforced steel corners on the largest - goes up without tools
- Oversized, screened vents with double cuffs for ducting and cabling without losing light-proofing
- Removable drip tray catches spills and run-off before they reach the floor
- Roof hanging bars and straps rated for a full lighting and extraction load
- A size for almost any space - from a 40x40cm propagation tent to a 300x300cm room, including 180cm and 90cm-tall options for low ceilings
How to Use
Build the frame first - poles push-fit into the corner connectors without tools - then fit the canvas over the frame from the top down and zip the door last. Route ducting and cabling through the oversized double-cuff ports rather than the door zips, and hang the light, filter and any clip fans from the roof bars rather than resting equipment on the canvas. Wipe down the Mylar lining between grows, and check the drip tray regularly if you're running a flood-and-drain or drip system inside the tent.
Choose the size by floor area first, then height. Leave a little clearance above the tent to lift the roof poles into place and room around the ports for ducting and a carbon filter. Where headroom is the limit, the flat-roof 120x120x180cm and the pitched-roof 120x120x180cm (Reinforced Roof) give the same 1.2m square footprint, and the 60x90x90cm sits on a bench or in a cupboard for cuttings, seedlings and mother plants.
Technical Specifications
- Range: BudBox Lite
- Lining: silver Mylar – BudBox make every Lite size in Mylar only
- Frame: white powder-coated steel tube
- Seams: double-stitched
- Vents: double-cuffed, 20% oversized
- Passive vents: micro-mesh screened
- Fittings: drip tray, roof hanging bars and straps, main door clips
- Canvas: light-tight outer shell that unzips completely
- Floor space: clear – no cross-running floor poles
- Warranty: 1 year against manufacturing defects (BudBox)
| By size | 40cm x 40cm x 120cm | 60cm x 60cm x 140cm | 60cm x 90cm x 90cm |
|---|---|---|---|
| Duct ports | 2 x 154 mm | 1 x 204, 1 x 154 mm | 1 x 154 mm |
| Cable ports | 1 x 80 mm | 1 x 80 mm | 1 x 100 mm |
| Passive vents | 1 | 1 | 2 |
| Doors | 1 front | ||
| Hanging straps | 2 | ||
| Frame poles | 16 mm | ||
| Corners | plastic | ||
| Roof | flat | ||
| Dimensions | 40 x 40 x 120cm | 60 x 60 x 140cm | 60 x 90 x 90cm |
| By size | 80cm x 80cm x 160cm | 80cm x 80cm x 200cm | 100cm x 100cm x 180cm |
|---|---|---|---|
| Duct ports | 1 x 254, 1 x 204 mm | ||
| Cable ports | 1 x 80 mm | ||
| Passive vents | 1 | ||
| Doors | 1 front | ||
| Hanging straps | 2 | ||
| Frame poles | 16 mm | ||
| Corners | plastic | ||
| Roof | flat | ||
| Dimensions | 80 x 80 x 160cm | 80 x 80 x 200cm | 100 x 100 x 180cm |
| By size | 100cm x 100cm x 200cm | 120cm x 120cm x 180cm Reinforced Roof | 120cm x 120cm x 180cm |
|---|---|---|---|
| Duct ports | 1 x 254, 1 x 204 mm | 2 x 254, 1 x 204 mm | 2 x 254 mm |
| Cable ports | 1 x 80 mm | 2 x 80 mm | 1 x 80 mm |
| Passive vents | 1 | ||
| Doors | 1 front | ||
| Hanging straps | 2 | 3 | 2 |
| Frame poles | 16 mm | ||
| Corners | plastic | metal, push/click | plastic |
| Roof | flat | pitched, 140 cm walls | flat |
| Dimensions | 100 x 100 x 200cm | 120 x 120 x 180cm | 120 x 120 x 180cm |
| By size | 120cm x 120cm x 200cm | 120cm x 240cm x 200cm | 150cm x 150cm x 200cm |
|---|---|---|---|
| Duct ports | 2 x 254 mm | 4 x 254 mm | 2 x 254 mm |
| Cable ports | 1 x 80 mm | 2 x 102 mm | 1 x 80 mm |
| Passive vents | 1 | 2 | 1 |
| Doors | 1 front | 2 front, 1 side | 1 front |
| Hanging straps | 2 | 4 | 2 |
| Frame poles | 16 mm | ||
| Corners | plastic | ||
| Roof | flat | ||
| Dimensions | 120 x 120 x 200cm | 120 x 240 x 200cm | 150 x 150 x 200cm |
| By size | 150cm x 300cm x 200cm | 200cm x 200cm x 200cm | 200cm x 300cm x 200cm |
|---|---|---|---|
| Duct ports | 4 x 254 mm | 4 x 254 mm | 2 x 315, 2 x 254 mm |
| Cable ports | 2 x 102 mm | ||
| Passive vents | 2 | ||
| Doors | 2 front, 1 side | ||
| Hanging straps | 4 | 6 | 6 |
| Frame poles | 16 mm | 19 mm | 19 mm |
| Corners | plastic | metal, push/click | metal, push/click |
| Roof | flat | ||
| Dimensions | 150 x 300 x 200cm | 200 x 200 x 200cm | 200 x 300 x 200cm |
| By size | 240cm x 240cm x 200cm | 300cm x 300cm x 200cm |
|---|---|---|
| Duct ports | 2 x 315, 2 x 254 mm | |
| Cable ports | 2 x 102 mm | |
| Passive vents | 2 | |
| Doors | 2 front, 1 side | |
| Hanging straps | 6 | |
| Frame poles | 19 mm | |
| Corners | metal, push/click | |
| Roof | flat | |
| Dimensions | 240 x 240 x 200cm | 300 x 300 x 200cm |
Frequently Asked Questions
What is the difference between the 120x120x180cm and the 120x120x180cm (Reinforced Roof)?
Both have a 1.2m square footprint and stand 180cm at the highest point. The standard model has a flat roof and plastic corner connectors; the Reinforced Roof model is BudBox's loft tent, with a pitched roof for sloping ceilings and all-metal corner connectors.
How does the BudBox Lite compare with the BudBox Pro?
The Lite uses white powder-coated 16mm poles with plastic connectors (19mm poles with metal connectors on the largest sizes) and comes in silver Mylar only. The Pro range moves to a 25mm black powder-coated steel frame with metal corners from 120x120cm upwards, offers a PRO White lining as well as Mylar, and adds a green viewing window, extra access doors and an uplift irrigation bar.
What size fan and ducting fit the ports?
The 254mm ports take 250mm (10-inch) ducting, and the 315mm ports on the 240x240cm, 200x300cm and 300x300cm tents take 315mm (12-inch). The smaller tents have 154mm and 204mm ports for 150mm and 200mm kits. Every port is double-cuffed and about 20% oversized, so there is room for insulated ducting.
Can I hang a light and carbon filter from the roof?
Yes - the roof hanging bars and straps are there for lights, filters and fans. Hang the light on rope ratchets so you can raise it as plants grow, and on the larger tents spread a heavy carbon filter across more than one bar rather than loading a single pole.
Works Well With
