Description
A Square 2.25m² Room With Extra Headroom for Bigger Lights
The BudBox Pro Tent (150cm x 150cm x 220cm) gives you the same 2.25m² square footprint as BudBox's popular XL plus tent, with an extra 20cm of height for larger fixtures, air-cooled reflectors and ducting to clear the canopy. The black powder-coated 25mm tempered steel frame with full metal push-and-click corner connectors is rigid enough to carry heavy extractor fans, carbon filters and up to two 600W-class lamps without the frame flexing or corners working loose. It comes with a choice of silver Mylar or BudBox's PRO White lining: the flat white reflects more PAR light and avoids hot spots, while BudBox say Mylar reflects more heat energy and runs around 6-8°C warmer, so White is the cooler option under powerful lights.
Key Benefits
- Load-bearing 25mm steel frame holds heavy fans, filters and lights without flex
- 2 side access doors alongside the 2 front main doors for easier day-to-day access
- Oversized reducible vents — 2 x 275mm and 2 x 225mm — take ducting of any diameter
- Uplift irrigation bar and 2 irrigation ports for a clean recirculating or run-to-waste setup
- Light-tight zips and seams seal the space with no leaks in or out
- Fully waterproof inner plus spill tray contains runoff and protects the floor
How to Use
- Assemble the frame with the push-and-click poles and metal corner connectors, then fit the waterproof inner and spill tray.
- Centre one large light or space two across the square footprint, using the extra height for reflector and ducting clearance.
- Run ducting out through the 275mm or 225mm vents, sizing down with the reducers to match your fan.
- Route irrigation through the dedicated ports and uplift bar to keep the doors clear.
Technical Specifications
- Dimensions (cm): 150 x 150 x 220
- Frame: 25mm steel poles, metal push/click corners
- Fabric: Canvas, double-stitched seams
- Lining: Silver Mylar / White
- External dimensions: 150cm x 150cm x 220cm (1.5m x 1.5m footprint, 2.2m tall)
- Footprint: 2.25m²
- Doors: 2 x front main doors, 2 x side access doors
- Vents: 2 x 275mm, 2 x 225mm, 2 x 100mm reducible ports, 2 x irrigation ports, 1 uplift irrigation bar
- Fittings: 3 roof hanging bars, 3 hanging straps, 1 night-vision viewing window, 2 micro-mesh screened passive vents, waterproof inner with removable spill tray
- Assembly: tool-free push-and-click poles with metal corner connectors
Frequently Asked Questions
How does this differ from the 150x150x200cm XL plus?
The doors, ports and frame are the same. This HL (HighLine) model is 20cm taller at 220cm, which leaves more room above the canopy for reflectors, ducting and taller plants; the 200cm XL plus suits rooms with a lower ceiling.
What size extraction fan does it need?
The tent holds just under 5m³ of air, so one change a minute is about 300m³/h before you allow for a carbon filter, ducting and light heat. A 150mm (6in) fan and filter is the usual minimum and a 200mm (8in) gives headroom with HID lighting, run through the 275mm or 225mm ports.
Silver Mylar or PRO White — which lining should I choose?
BudBox's flat PRO White lining reflects more PAR light than Mylar and spreads it without hot spots; BudBox say Mylar reflects more heat and runs around 6-8°C warmer. White is the cooler choice for powerful lights or a warm room; Silver costs less.
Works Well With
