Description
3.0 µmol/J From a Six-Bar 720W With the Driver Built In
The Elite 720W Pro 3.0 LED Grow Light is the higher-efficiency version of Elite Lighting's six-bar 720W fixture, producing 2160 µmol/s at 3.0 µmol/J. The driver is built in, so there is no separate ballast to hang or wire, and at 105 x 109 x 4.1cm the frame fits inside a 1.2m grow tent while lighting a canopy of up to 1.5m x 1.5m. A dial on the control panel dims it from 25 to 100%, and its daisy-chain feature lets several fixtures work together in a larger grow room.
Key Benefits
- 2160 µmol/s from 720W – 3.0 µmol/J efficacy turns more of each watt into usable light for vegetative growth and flowering.
- Built-in driver – no remote driver or ballast to mount; one power lead into the frame.
- Six full spectrum bars – light spread evenly across the canopy instead of concentrated under a single lamp.
- Dimmable 25–100% – an onboard dial for gentle light over young plants and full output in flowering.
- Daisy-chain feature and RJ ports – CH1 and CH2 ports on the control panel for linking fixtures and connecting external controllers.
- Slim 4.1cm profile – a 105 x 109cm frame that sits comfortably inside a 1.2m tent.
Heat and Uneven Light in a 1.2m Tent?
A 600W HPS in a 1.2m tent concentrates light under the bulb, leaves the corners short and pushes the temperature up, which in turn drags humidity down and makes the extraction fan work harder. The Elite 720W Pro 3.0 spreads 2160 µmol/s across six bars, so the edges of the canopy receive far more even light, plants grow more uniformly with less excessive stretch, and radiant heat at leaf level is much lower. With the driver integrated into the frame, the whole fixture hangs as one unit and the tent stays tidy.
How to Use
- Hang it level and central over the canopy on adjustable hangers such as rope ratchets.
- Seedlings and cuttings: start with the dial at the low end of its 25–100% range and the fixture well above the plants.
- Vegetative growth to flowering: raise output step by step towards 100%, lowering the fixture as plants establish.
- Watch the top leaves for bleaching or upward curling, and raise or dim the light if you see it.
- Run it from a timer for a consistent day length, and link further fixtures with the daisy-chain feature in larger rooms.
Technical Specifications
- Power draw: 720W
- PPF: 2160 µmol/s
- Efficacy: 3.0 µmol/J
- Fixture size: 105 x 109 x 4.1 cm
- Brand: Elite Lighting
- Model: 720W Pro 3.0
- Spectrum: Full spectrum
- LED bars: 6
- Driver: Built in
- Dimming: 25–100%, dial on the control panel
- Control: CH1 and CH2 RJ ports; daisy-chain feature
- Coverage: Up to 1.5m x 1.5m
- Power inlet: IEC (kettle-type) socket on the frame
- Rated life: 50,000 hours
- Shipping weight: 9 kg
Frequently Asked Questions
Will it fit in a 1.2m x 1.2m grow tent?
Yes. The frame measures 105 x 109cm, which leaves room on each side inside a 120cm tent for hanging and adjustment.
How does it differ from the earlier Elite 720W with built-in driver?
The Pro 3.0 produces 2160 µmol/s at 3.0 µmol/J, against 1944 µmol/s at 2.7 µmol/J for the earlier model, so it delivers about 11% more light from the same 720W.
Does it need a separate driver or ballast?
No. The driver is built into the frame; the fixture takes a standard IEC power lead and plugs straight in.
Can I dim it or link several lights?
Yes. The dial dims it from 25 to 100%, and the daisy-chain feature with CH1 and CH2 RJ ports lets you link fixtures and connect an external controller.
Works Well With
