LightHouse LITE Grow Tent – Budget Tent for Indoor Plants

A no-frills grow tent that still seals properly

The LightHouse LITE Grow Tent is the budget half of the LightHouse range: a tri-layer 210 denier cover lined with LightHouse's own ULTRALUX reflective material, over a lightweight 16mm steel pole frame with nylon corners. It comes in 1m x 1m, 1.2m x 1.2m and 1.2m x 2.4m footprints, all 2m tall, and every size keeps the double-lined, drawstring ducting ports of the premium MAX. That matters more than the frame: a tent that leaks light or lets air bypass the fan is where heat and humidity problems start, and the LITE gives you a tight seal and proper airflow without paying for a heavier build.

Key Benefits

• ULTRALUX liner - the maker rates it up to 30% more reflective than traditional linings, so more light is thrown back onto the canopy
• Tivax double-lined zips close cleanly without snagging and hold a good light seal
• Light-tight ports - every sock is double-lined with a pull toggle on each lining
• 250mm (10") roof extraction plus two inline 250mm socks for air-cooled lighting and a 250mm intake sock
• Low-level passive vents with fine anti-mite mesh and light-proof covers
• One-piece waterproof insert tray catches spills and run-off

How to Use

• Build the frame on a level floor, pushing each pole fully into its corner, then draw the cover over and close every zip.
• Hang the light and carbon filter from the roof poles and filter straps, never from the fabric.
• Extract through the roof sock. HydroGarden's minimum fan sizes: 100mm (4") for the 1m, 125mm (5") for the 1.2m and 150mm (6") for the 1.2m x 2.4m.
• Maker's lighting guide: 1 x 400W HID (1m), 1 x 600W HID (1.2m), 2 x 600W HID (1.2m x 2.4m), or an LED of similar coverage.
• Pull the toggles tight on unused ports, then check for light leaks with the lights on inside and the room dark.

Technical Specifications