Quest 100 Compact Commercial Dehumidifier – 44L/Day
Quest 100 Compact Commercial Dehumidifier – 44L/Day
In stock
Order by 3pm Mon–Fri — we aim to post same day · FREE Express Delivery over £60 · 1–2 working days · Free Wembley pickup
- 14-day returns
- Price match promise
- Free Wembley store pickup
- Advice from the team: 020 3488 0419
Pairs well with
Description
Commercial moisture removal in a footprint 20% smaller than it should be
The Quest 100 is the 50 Hz international model — 230V, so it runs on a standard UK supply. It removes 44 litres a day at 26.7°C and 60% RH while drawing only 2.5 amps, which is what its patented M-CoRR multi-coil refrigeration buys you: commercial output on a 13 amp UK breaker. ⚑ It also drains internally, so unlike most dehumidifiers of this size it needs no P-trap — one less thing to plumb and one less thing to get wrong.
Key Benefits
- 44 litres a day at 26.7°C and 60% RH, and 29.3 litres at the cooler 23.9°C / 50% RH
- 3.2 litres per kWh — patented M-CoRR gives the highest efficiency Quest make
- 2.5 amps and 540 watts, on a 13 A UK breaker
- No P-trap required thanks to the internal drainage system
- Digital controls with 1% RH setpoints, self-diagnostics and filter alerts at 2,000 fan hours
- ⚑ Dark mode disables every display light, for rooms where light leak matters
- Overhead or ground placement, with a corrosion-resistant base for damp rooms
- Variable speed EC fan and MERV 13 filtration
When the room is small and the humidity load is not
A tight space fills with moisture faster than a large one, and there is rarely room for the machine that could handle it. The Quest 100 is built for exactly that gap — a 61 x 40.6 x 36.8 cm body at 27.2 kg that still shifts 44 litres a day. It holds a setpoint in 1% increments rather than swinging around it, works from 13°C to 35°C, and its MERV 13 filter takes dust, pollen and mould spores out of the air while it dries it.
How to Use
- Stand it on the floor or hang it — both are supported; the hanging kit is a separate accessory
- Plug it in. No installation and no commissioning
- Set your target humidity in 1% steps on the digital panel, or hand control to a building system through the 24V terminal block, which disables the onboard sensor while active
- Run a drain line from the 1.9 cm threaded outlet — ⚑ no P-trap needed on this model
- Choose fan mode: Auto for on-demand circulation, On for continuous airflow
- Change the MERV 13 filter when the 2,000-hour alert appears
Technical Specifications
- Model: 4046590-XX (Quest 100, 50 Hz international)
- Water removal: 44 litres/day at 26.7°C / 60% RH; 29.3 litres/day at 23.9°C / 50% RH
- Efficiency: 3.2 litres/kWh (6.7 pints/kWh)
- Power: 540 W
- Current draw: 2.5 A
- Supply voltage: 230V, 50 Hz
- Recommended breaker: 13 A (UK)
- Airflow: 280 CFM
- Total heat load: 6,200 BTU
- Operating temperature: 13°C to 35°C
- Dimensions: 61 (L) x 40.6 (W) x 36.8 (H) cm
- Weight: 27.2 kg
- Filtration: MERV 13, filter size 30.5 x 35.6 x 2.5 cm
- Controls: onboard digital with low voltage terminal block, self-diagnostics, dark mode
- Fan: variable speed EC motor
- Power cord: 3 m, IEC 60320-C13
- Refrigerant: R454b, 17 oz
- Drain connection: 1.9 cm threaded NPT, internal drainage, no P-trap required
- Warranty: 3 year limited
