Quest 100 Dehumidifier Accessories | MERV 13 Filter, Duct Kit & Hanging Kit

Genuine parts to keep your Quest 100 filtering, ducting and mounted right

These are the genuine manufacturer accessories for the Quest 100 Dehumidifier, covering the three things that most affect performance in a sealed grow room: filtration, ducting and mounting. In hydroponics and sealed tents the dehumidifier runs continuously to strip out moisture from plant transpiration, and a clogged filter, badly routed airflow or a unit hogging floor space all quietly erode that performance. Genuine MERV-13 filtration, a duct kit and a hanging kit keep the unit clean, its airflow directed where it is needed, and the floor clear.

What's Included

• MERV-13 replacement filter (12" x 14" x 1") sized for the Quest 100
• Duct kit with collars for intake and exhaust
• Hanging kit for overhead mounting

Key Benefits

• Genuine Quest 100 fit engineered for the exact unit
• MERV-13 filtration captures mould spores, pollen and dust before the coils
• Protects internal coils from dust build-up for consistent performance
• Duct kit directs intake and exhaust air exactly where it's needed
• Hanging kit lifts the unit above canopy level and frees floor space
• Stable humidity supports healthy plants through veg and bloom

Filter clogging, poor airflow and wasted floor space?

A grow room dehumidifier works hard through veg and bloom, and a blocked filter or badly routed airflow lets humidity creep up - raising the risk of mould, weak growth and poor nutrient uptake. Ducting the intake and exhaust lets you pull from and return air to exactly the right spots, while hanging the unit above the canopy improves air movement and clears valuable floor space.

How to Use

MERV-13 Filter

1. Turn off and unplug the dehumidifier.
2. Open the filter compartment and remove the old filter.
3. Fit the replacement 12" x 14" x 1" MERV-13 filter so it sits flush in the frame.
4. Replace every grow cycle to maintain airflow and filtration efficiency.

Duct Kit

1. Fit the duct collars to the intake and exhaust ports.
2. Connect compatible ducting and secure it with clamps or fasteners.
3. Route the ducting to direct airflow where it's needed in the room.

Hanging Kit

1. Fix the mounting hardware securely to ceiling joists or a structural support.
2. Attach the suspension brackets to the dehumidifier.
3. Lift and secure the unit, checking it hangs level before switching on.