Bay6 - 1m x 1.5m x 2m

A Wider Reflective Tent With Room for Several Plants Side by Side

The BAY6 1m x 1.5m x 2m grow tent steps up to a rectangular footprint that takes multiple plants or a larger single light, in a sealed, fully reflective shell that keeps budget free for kit. It heads off the familiar problems of light leaks and unstable frames with 95% reflective mylar walls, a metal pole and plastic corner frame, tough zips and sealing drawstring ports. The 100cm x 150cm x 200cm footprint gives working width plus full 200cm height for hung equipment.

Key Benefits

• 100cm x 150cm floor area with room to line up several plants or run a larger light
• 200cm height for hanging a light, filter and fan with clearance above the canopy
• 95% reflective mylar interior that redirects light across the whole canopy for even coverage
• Robust metal pole frame with plastic corners for a stable structure that carries full equipment weight
• Heavy-duty zippers that take daily use without splitting
• Light-sealing drawstring ports and roof equipment support bars for sealed, tidy ducting and hardware

How to Use

• Build the frame from the poles and plastic corners, then pull the fabric over it and zip closed, securing at the base.
• Hang your light, carbon filter and inline fan from the roof bars, routing ducting through the drawstring ports and pulling them tight to seal light.
• Size your extraction: this tent is roughly 3.0 m3, so aim for about 180 m3/h for a full air change each minute, then multiply by 1.2 for the filter to around 216 m3/h.
• Over-spec the fan slightly and turn it down on a controller for quieter, more reliable running.