Description
A 6m² Titan Room Built for Multi-Zone Growing
The BudBox Pro Tent (200cm x 300cm x 220cm) extends the Titan range into a full 6m² rectangular room, large enough to run as two or more distinct zones under separate lights while sharing one light-tight, waterproof structure. The black powder-coated 25mm tempered steel frame with full metal push-and-click connectors carries the extra fabric and load of a room this size, and eight doors — two front main, one front access, four side access and one rear — give you access to every part of the tent without crossing the growing area. It comes with either BudBox's classic silver mylar lining or the flat PRO white interior, which BudBox rate as industry-leading for PAR reflectivity.
Key Benefits
- Load-bearing 25mm steel frame built for a large, multi-zone canopy
- 8 doors (2 front main, 1 front access, 4 side access, 1 rear) for access from every side
- Oversized reducible vents — 6 x 340mm and 6 x 275mm — support multiple extraction and intake points
- Uplift irrigation bar and 4 irrigation ports for a clean recirculating or run-to-waste setup at scale
- 4 x 100mm cable ports keep power, sensor and controller leads light-tight
- Fully waterproof inner plus spill tray contains runoff across the full 6m² floor
- Choice of lining - silver reflective mylar or flat PRO white for even, diffused light and a brighter working space
How to Use
- Assemble the frame with the push-and-click poles and metal corner connectors, then fit the waterproof inner and spill tray.
- Treat the room as two zones along its length, each with its own light and, if needed, its own extraction point.
- Run ducting through the 340mm or 275mm vents, balancing intake and extraction across both ends for even airflow.
- Route irrigation through the dedicated ports and uplift bar rather than the door zips.
Technical Specifications
- Dimensions (cm): 200 x 300 x 220
- Frame: 25mm steel poles, metal push/click corners
- Fabric: Canvas, double-stitched seams
- Lining: Silver Mylar / White
- External dimensions: 200cm x 300cm x 220cm (2.0m x 3.0m footprint, 2.2m tall)
- Footprint: 6.0m²
- Doors: 2 x front main doors, 1 x front access door, 4 x side access doors, 1 x rear access door
- Vents: 6 x 340mm, 6 x 275mm, 4 x 100mm reducible ports, 4 x irrigation ports, 1 uplift irrigation bar
- Fittings: 6 roof hanging bars, 6 hanging straps, 1 night-vision viewing window, 4 micro-mesh screened passive vents, waterproof inner with removable spill tray
- Assembly: tool-free push-and-click poles with metal corner connectors
Frequently Asked Questions
Silver or white lining - what is the difference?
The tent, frame, doors and ports are identical; only the inner lining changes. Silver is BudBox's reflective mylar. The PRO white is a flat white interior that BudBox rate as industry-leading for PAR reflectivity: it scatters light evenly rather than in bright patches, and the pale walls make pests and leaf problems easier to spot.
What size extraction does a 200 x 300 x 220cm tent need?
The tent holds about 13.2m³ of air. Changing it once a minute takes roughly 790m³/h before you allow for the resistance of a carbon filter and ducting, so an 8in (200mm) or 10in (250mm) fan and filter kit with speed control is the usual choice.
How many lights suit a 6m² floor?
As a guide, allow about 1.5m² per 600W-class fixture, which puts four lights across this floor - two per zone if you split the room. The 6 roof hanging bars and 6 hanging straps give plenty of hanging points.
Can I keep the reservoir outside the tent?
Yes. The uplift irrigation bar lets feed and return pipes run under the bottom edge at floor level, and the 4 irrigation ports give a light-tight route for hoses, so the tank can sit outside the growing area.
Works Well With
